Chapter 8
Connections and Settings
Chapter 8
Connections and Settings
121
Connections for Digital Nonlinear Editing Using
SDTI (QSDI) Interface
(Optional DSBK-150 Required)
This unit can be connected to an ES-7 EditStation to
configure a digital non-linear editing system. Using the
SDTI (QSDI) interface, you can transfer video, audio,
timecode, and other compressed data between this unit
and the ES-7.
The unit supports ClipLink functions, enabling index
pictures recorded on tape and ClipLink log data stored
in cassette memory to be transferred to the ES-7 in an
instant.
For an overview of the ClipLink function, see the appendix
“ClipLink Guide” (page 147).
The following is a connection diagram for digital non-
linear editing system in which this unit serves as the
recorder.
For connections of the ES-7’s peripheral devices (the
control panel, the disk unit, etc.) and the player, refer
to your ES-7 Operating Instructions.
Note
In this case, the DSBK-150 SDTI (QSDI) Iuput/Output
Board is required.
REF. VIDEO IN
REMOTE
SDTI(QSDI) IN
SDTI(QSDI) OUT
BB OUT
RECORDER
QSDI OUTPUT
QSDI INPUT
ES-7
DSR-70A/70AP (recorder)
1
2
1
1
Setting
REMOTE
ON
1
75
Ω
coaxial cable (not supplied)
2
RCC-5G/10G/30G 9-pin remote control cable
(length 5 m (16 ft)/10 m (33 ft)/30 m (98 ft), not
supplied)
Settings on the DSR-70A/70AP
Switch
REMOTE/LOCAL switch
REF. VIDEO IN 75
Ω
termination
switch
