Sony DVCAM DSR-60, Руководство по обслуживанию

Страница: 27 / 324

1-17
DSR-80/80P/60/60P
Setting the Time Data
Chapter 3 Convenient Functions for Editing Operation
32
Chapter 3 Convenient Functions for Editing Operation
C
Drop frame indication for time code
generator (on DSR-80 only)
D
DSR-80/80P operation modes
a) “+2.0” in the left box is an example of playback speed
indication.
To display the desired time data in the
time counter display
Press the COUNTER SELECT button on the front
panel of the unit.
Each press of this button cycles through three options:
CNT value, time code, and user bit data. The time
data type indicator for each option lights as it is
selected.
Note
If the REMOTE/LOCAL switch is set to REMOTE,
the COUNTER SELECT button does not operate
while the tape is moving. In such cases, use the
external equipment connected to the REMOTE
connector on the rear panel to select the time data.
To reset the CNT value
Press the RESET (NO) button on the menu control
panel. This resets the CNT value to 0:00:00:00.
Note
If during playback the recording on the tape includes
discontinuities, the counter may operate incorrectly at
the corresponding points.
) 0 6 r p
Time data type indicators
COUNTER SELECT button
Time counter display
Indication Operation mode
THREADING
Tape is being threaded (this indicator
is displayed from the time a cassette is
inserted until the tape has been
threaded)
UNTHREADING Tape is being unthreaded (this
indicator is displayed from the time the
EJECT button is pressed until the
cassette is actually ejected)
CASSETTE OUT No cassette has been loaded
STANDBY OFF Standby off mode
T. RELEASE Tension release mode
STOP Stop mode
F. FWD Fast forward mode
REW Rewind mode
PREROLL Preroll mode
PLAY Playback mode (servo unlocked)
PLAY LOCK Playback mode (servo locked)
PLAY PAUSE Playback pause mode
REC Recording mode (servo unlocked)
REC LOCK Recording mode (servo locked)
REC PAUSE Recording pause mode
EDIT Edit mode (servo unlocked)
EDIT LOCK Edit mode (servo locked)
JOG STILL Still picture playback in jog mode
JOG FWD Jog forward
JOG REV Jog reverse
S2.0 Shuttle mode (playback speed) a)
PAUSE Shuttle playback pause mode
. Drop frame mode (factory default setting)
: Non-drop frame mode
Time data type
indicator Time data shown in the time counter
display
CNT (count value of the time counter) COUNTER
TC Time code (if recording, the time code is
generated by the internal time code
generator; if playing back, the time code
is read from the tape)
U-BIT User bit data (if recording, the user bit
data is according to the most recent
settings; if playing back, the user bit
data is read from the tape)
Chapter 3 Convenient Functions for Editing Operation
Chapter 3 Convenient Functions for Editing Operation
33
Using the Internal Time Code
Generator
You can set the time code’s initial value before
recording the time code generated by the internal time
code generator onto a tape. In addition, you can set the
time code’s user bits to record user bit data such as the
date, time, scene number, reel number, or other useful
information.
When the unit is equipped with an optional DSBK-
130/130P Time Code Input/Output Board, the internal
time code generator can be locked to (synchronized
with) an external time code.
To set the time code’s initial value and
user bit data
1
Press the COUNTER SELECT button to light the
time data type indicator “TC” or “U-BIT”.
TC : To set the time code’s initial value.
U-BIT : To set user bit data
The current time code value or user bit data is
shown in the time counter display.
2
Set the TIME CODE menu items as shown below.
Menu item Setting
TC MODE “INT”
RUN MODE “FREE RUN” or “REC RUN”
DF MODE Usually “DF”
(on DSR-80 only)
For details of menu settings, see Chapter 4 “Menu
Settings”.
3
Press the TC PRESET button on the menu control
panel.
The current setting is shown on the monitor screen
and in the time counter display on the unit’s front
panel. The leftmost digit keeps flashing.
One of the following menu screens is displayed on
the monitor depending on the setting made in
Step
1
.
TC PRESET MODE
TCG 00:00:00:00
UP :DATA INCREMENT
DOWN :DATA DECREMENT
LEFT :LEFT SHIFT
RIGHT :RIGHT SHIFT
RESET :DATA CLEAR
SET :DATA SET
TC PSET:ABORT & EXIT
UB PRESET MODE
UBG 00:00:00:00
UP :DATA INCREMENT
DOWN :DATA DECREMENT
LEFT :LEFT SHIFT
RIGHT :RIGHT SHIFT
RESET :DATA CLEAR
SET :DATA SET
TC PSET:ABORT & EXIT
Time code initial value User bit setting screen
setting screen
Note
If you press the TC PRESET button while CNT
value is being displayed, the message “COUNTER
MODE IS SELECTED. SET COUNTER
SELECT SWITCH TO TC OR UB” will appear on
the monitor screen and “CNT mode!” will appear
in the time counter display on the unit’s front
panel. If this happens, press the COUNTER
SELECT button to light the time data type
indicator “TC” or “U-BIT”.
4
Use the
¿
and
÷
buttons to move the flashing
digit to the value to be changed.
5
Use the ˘ and ≥ buttons to change the value of the
flashing digit.
Enter hexadecimal values (0 to 9, A to F) when
setting user bit data.
6
Repeat Steps
4
and
5
until you have set the desired
values for all digits.
To set a value of 00:00:00:00, simply press the
RESET (NO) button.
) 0 6 r p
1 2 3 4,5,6 7
(Continued)