Sony DVCAM DSR-60, Руководство по обслуживанию

Страница: 42 / 324

1-32
DSR-80/80P/60/60P
62
Chapter 5 Connections and Settings
Chapter 5
Connections and Settings
VIDEO INPUTS
COMPONENT 2
VIDEO INPUTS
COMPONENT 1
COMPONENT VIDEO
Y, R–Y, B–Y/RGB OUT
COMPONENT VIDEO
Y, R–Y, B–Y/RGB IN
PGM OUT
COMPONENT 1
AUDIO IN
CH-1 CH-2
LINE OUT 2 LINE OUT 1
1 2 3 4 MIC/LINE
IN
AUDIO OUT
CH-1 CH-2
COMPONENT 1
OUTPUT
AUDIO OUTPUT
CH-1
CH-2
CH-2 OUT CH-1 OUT
CH-2 IN CH-1 IN
REMOTE
AC IN
ANALOG I/O
REF.VIDEO VIDEO OUT
MONITOR
AUDIO
S VIDEO OUT
AUDIO OUT
QSDI
COMPONENT VIDEO
TBC REMOTE
SDI OUTPUT
TIME CODE OUT
Video/audio signal connections
The following shows an example of video/audio signal
connections in an A/B roll editing system. In this
example, analog component signals are used as the
video signals and XLR 3-pin connectors are used as
audio input/output connectors.
Settings on the DSR-80/80P (recorder)
For details of the video/audio input and audio mode
settings, see “Settings for Recording” (page 19).
DFS-500/500P
DME Switcher
1
12-pin/3-BNC cross cable (not
supplied) (Consult your Sony
dealer about this cable.)
2
12-pin dubbing cable (not
supplied)
3
Cable with XLR connectors
(not supplied)
UVW-1600/1600P (player 2)
DSR-60/60P (player 1)
MXP-290
Audio Mixer
DSR-80/80P
(recorder)
DPS-D7 or other delay unit
Switch Setting
AUDIO IN 600
Ω
ON/OFF ON
AUDIO IN –6dBm/0dBm/+4dBm No4dBm
1
3 3
3
3
3
3
3
3
1
2
Connections for an A/B Roll Editing System
Chapter 5 Connections and Settings
63
Chapter 5
Connections and Settings
Connection of a video monitor
Set up the following connections to enable monitoring
of video and audio signals on a video monitor. In
addition to video signals, you can have time data, the
DSR-80/80P’s operation mode, alarm messages, and
other information displayed as text on the monitor
screen by setting “CHARA. DISPLAY” under the
DISPLAY CONTROL menu item to “ON” (this is the
factory default setting).
For details of menu operations, see Chapter 4.
75
Ω
termination switch: ON (or attach a
75
Ω
terminator)
Input switches: Set according to the type
of input signals.
Video monitor
Audio input Composite video input
1
Cable with RCA phono
plugs (not supplied)
2
75
Ω
coaxial cable
(not supplied)
DSR-80/80P
1
2
VIDEO
OUT
2 (SUPER)
MONITOR
AUDIO
Settings on an editing control unit
When connecting an editing control unit, make the
settings as follows, according to the model.
PVE-500
No settings are required.
BVE-600/900/910/2000 (NTSC model) or FXE-
100/120
Set the VCR constants as follows.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
80 11 00 96 05 05 03 80 0A 08 FE 00 80 5A FF
BVE-600/900/910/2000 (PAL model) or FXE-
100P/120P
Set the VCR constants as follows.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
81 11 00 7D 05 05 02 80 0A 07 FE 00 80 4C FF
RM-450/RM-450CE
Set the DIP switches as follows.
• Left switches
7 6 5 4 3 2 1 0
OFF – – OFF – – – –
• Right switches (RM-450)
7 6 5 4 3 2 1 0
OFF – OFF ON OFF OFF ON ON
• Right switches (RM-450CE)
7 6 5 4 3 2 1 0
ON – OFF ON OFF OFF ON ON
BVE-800
Set the DIP switches as follows.
• SW2
1 2 3 4 5 6 7 8
ON OFF ON ON – ON ON –
• SW3 (NTSC model)
1 2 3 4 5 6 7 8
OFF ON OFF ON – ON OFF OFF
• SW3 (PAL model)
1 2 3 4 5 6 7 8
ON ON OFF ON – ON OFF OFF