Sony DVCAM DSR-60 Скачать руководство пользователя страница 124

Страница: 124 / 324

4-4

DSR-80/80P/60/60P

4-2. MENU DATA CONTROL

The MENU DATA CONTROL item provides a SETUP MENU

data display which is used to save and load the SET UP MENU

data.

This item is used to return the settings to their original values after

maintenance is complete or ROM upgrading is complete.

Operating procedure

1. Enter the maintenance menu.

2. Move the cursor to “MENU DATA CONTROL” which is

displayed with a white background, using the

[(]

[)]

keys.

3. Press the

[*]

key.

“MENU DATA CONTROL” is selected and its lower layer

submenu appears.

4. Move the cursor displayed with a white background to a

desired item using the

[(]

[)]

keys.

5. When an item is selected, press the

[*]

key. The contents of

the selected item appear.

6. Press the

[&]

key to exit MENU DATA CONTROL and return

to the main menu.

7. Press the

[MENU]

key to exit the maintenance menu.

Содержание DVCAM DSR-60





































































































































































































































































































































Результаты поиска

Содержание DVCAM DSR-60

Отзывы:

Sony DVCAM DSR-60, Руководство по обслуживанию, Страница: 124 / 324

Результаты поиска

Содержание DVCAM DSR-60

Отзывы: