Sony DVCAM DSR-60, Руководство по обслуживанию

Страница: 117 / 324

3-41 DSR-80/80P/60/60P
3-13-3. Replacement of the Flexible Card Wire
The following flexible card wires are used in this unit.
Take utmost care when handling the flexible card wires
because their life is extremely shortened by folding.
Destination Number Number of
of pins flexible
card wires
CC-75 board _ MB-713 board 13 pins a piece
CC-75 board _ CC-76 board 5 pins a piece
KY-336B board _ FP-75 board 11 pins a piece
KY-336B board _ MB-713 board 36 pins a piece
MS-43 board
_
MB-713 board 36 pins two pieces
MS-43 board _ RM-159 board 9 pins a piece
MS-43 board
_
RM-160 board 9 pins a piece
MS-43 board _ capstan motor 15 pins a piece
MS-43 board _ drum 15 pins a piece
MS-43 board _ 6 pins a piece
cassette memory terminal assembly
PRE-39 board _ MB-713 board 14 pins a piece
PRE-39 board
_
drum 8 pins a piece
Destination Number Number of
of pins flexible
card wires
CC-75 board _ MB-712 board 13 pins a piece
CC-75 board
_
CC-76 baord 5 pins a piece
KY-336 board _ FP-75 board 11 pins a piece
KY-336 board
_
MB-712 board 36 pins a piece
MS-43 board _ MB-712 board 36 pins two pieces
MS-43 board _ RM-159 board 9 pins a piece
MS-43 board _ RM-160 board 9 pins a piece
MS-43 board _ capstan motor 15 pins a piece
MS-43 board
_
drum 15 pins a piece
MS-43 board _ 6 pins a piece
cassette memory terminal assembly
PRE-34 board
_
MB-712 board 22 pins two pieces
PRE-34 board _ drum 18 pins a piece
DSR-60/60P
DSR-80/80P
< ZIF type connector >
Removal of the ZIF type connector
Raise the marked portions of the connector and unlock the
lock to pull out the flexible card wires.
Connection of the ZIF type connector
Insert the flexible card wires fully up to the marked line
and push up the marked portions of the connectors.
*
Make sure to insert and remove the wires that have no
locking mechanism according to the above described
procedure.
Note : The flexible card wire has the conduction part
and the insulation part. Connect the flexible
card wire after checking them as shown in the
figure.
If the conduction part and insulation part are
connected in the wrong direction, the circuit
will not operate.
Connector
Flexible card wire
Locked status
Unlocked status
Connector
Flexible card wire
*
*
*
*
V groove
Insulation part
Conduction part
Blue