Sony DSC-H50, Руководство по обслуживанию

Страница: 86 / 155

ENGLISH JAPANESE
ENGLISH JAPANESE
DSC-H50_L3
1-4. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the HOME screen. (When erasing the data, execute formatting the internal memory.)
Note 1:
When replacing the SY-201 board, erase the data in internal memory of the board before replacement.
Note 2: When replacing the SY-201 board, execute formatting and initialize the internal memory after replacement.
Method for Copying the Data in Internal Memory
Method for Formatting the Internal Memory
Copies all images in the internal memory to a “Memory Stick Duo”.
1
Insert a “Memory Stick Duo” having sufficient free capacity.
2
Select [Copy] with
v
/
V
on the control button, then press
z
.
The message “All data in internal memory will be copied” appears.
3
Select [OK] with
v
, then press
z
.
Copying starts.
To cancel copying
Select [Cancel] in step
3
, then press
z
.
Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little
remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.
You cannot select images to copy.
The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick Duo” after copying, then format the internal memory
([Format] in [Internal Memory Tool]).
A new folder is created on the “Memory Stick Duo” and all the data will be copied to it. You cannot
choose a specific folder and copy images to it.
The (Print order) marks on the images are not copied.
Copy
This item does not appear when a “Memory Stick Duo” is inserted in the camera.
Formats the internal memory.
Note that formatting permanently erases all data in the internal memory, including even protected images.
1
Select [Format] with
v
/
V
on the control button, then press
z
.
The message “All data in internal memory will be erased” appears.
2
Select [OK] with
v
, then press
z
.
Formatting starts.
To cancel formatting
Select [Cancel] in step
2
, then press
z
.
Format
1. SERVICE NOTE
1-3