6-35
DSC-H50_ADJ
10MODE screen and functions of each item
1
[Preparation]
button
Notes for aging is displayed.
2
Rec Interval setting and display
The setting of recording interval (sec.) is displayed. The set-
ting can be changed by entering a numeric value in this field.
3
Power Off Interval setting and display
The setting of power off interval (min.) is displayed. The set-
ting can be changed by entering a numeric value in this field.
4
[START]
button
The settings of parameters specified by the Rec Interval and
Power Off Interval for execution of 10MODE are sent to the
camera.
The 10MODE starts when the camera power is turned off once
and then on again.
The settings for execution of 10MODE are held until the cam-
era detects the battery end. They cannot be reset by the power
off or RESET button. To interrupt the 10MODE, use the
[STOP]
button.
5
[STOP]
button
The settings for execution of 10MODE are reset.
6
[GET]
button
After the 10MODE was executed, the number of recording
times is got from the counter in the camera. The result is dis-
played in the “Count” display field.
7
Count display
The number of recording times got by the
[GET]
button is dis-
played.
(2) AGING_REC
In the AGING_REC mode, still pictures are continuously recorded
at the interval (sec.) set to the “Rec Interval”.
At the start of AGING_REC, the counter in the camera is initial-
ized. This counter counts the number of recording times during
the execution of AGING_REC, and it holds the counts even dur-
ing the power off.
AGING_REC screen and functions of each item
1
[Preparation]
button
Notes for aging is displayed.
2
Rec Interval setting and display
The setting of recording interval (sec.) is displayed. The set-
ting can be changed by entering a numeric value in this field.
3
[START]
button
The AGING_REC starts. In the AGING_REC mode, the ag-
ing starts immediately when the
[START]
button is clicked.
At the battery end, the AGING_REC stops. To interrupt the
AGING_REC, use the
[STOP]
button, though the AGING_REC
stops also by the power off or RESET button.
4
[STOP]
button
The AGING_REC stops.
5
[GET]
button
After the AGING_REC was executed, the number of record-
ing times is got from the counter in the camera. The result is
displayed in the “Count” display field.
6
Count display
The number of recording times got by the
[GET]
button is dis-
played.
6
4
5
1
7
2 3
5
3
4
1
6
2
