Sony DFS-900M, Руководство по эксплуатации

Страница: 139 / 221

139
Customizing DME Effects
Chap
ter
5
Ad
jus
ting Wipes
and
K
ey
s
Softness sub menu parameters
Adjust the following parameters to adjust the softness of
the inner and outer sides of the border.
Bevel Color sub menu parameters
Beveled edges make a border appear three dimensional.
Adjust the following parameters to select whether to add
beveled edges to an image, and to adjust the color of the
beveled edges, if added.
It is not possible to adjust the widths of left, right, top, and
bottom beveled edges independently.
Beveled edge example
For information about how to adjust beveled edge widths,
see “Inner Width sub menu parameters” (page 138) and
“Outer Width sub menu parameters” (page 138).
Border HL (Highlight Setup) sub menu
parameters
Adjust the following parameters to specify the direction
and brightness of the light source that illuminates beveled
edges.
Beveled edge example
Adding Trail Effects, and Changing
the Color Type
You can adjust the parameters of the Sub Effects sub
menus to add trail effects to images. You can also change
the image color type (chroma control).
Trail effect: Adds trail-like afterimages.
Chroma control: Allows you to change the color type of
images to sepia, black and white, or negative.
Operation Knob Parameter Settings
Adjust the
softness of the
inner side of the
border.
F1 InS (Inner
Softness)
0 to15
Adjust the
softness of the
outer side of the
border.
F2 OutS (Outer
Softness)
0 to15
Note
Operation Knob Parameter Settings
Select whether
to add beveled
edges to an
image.
F1 Bvl (Beveled
Enable)
On:
Add
Off:
Do not
add
Adjust the
luminance of the
beveled edges.
F2 Lum (Luminance) 0.0 to 108.6
Adjust the
saturation (color
density) of the
beveled edges.
F3 Sat (Saturation) 0.0 to 100
Adjust the hue of
the beveled
edges.
F4 Hue 0.0 to 359.5
Beveled edge
Operation Knob Parameter Settings
Set the direction of
the light source.
(Specify as a
position
corresponding to a
number on the face
of an analog clock.)
Example:
3
corresponds to the
direction from 3
o’clock.
F1 Dir (Hilight
Direction)
0 to 11
Set the mixture ratio
of the highlight
(lighter) part and the
border color.
F2 HL (Hilight
Opacity)
0 to 100.0
Set the mixture ratio
of the lowlight
(darker) part and
the border color.
F3 LL (Lowlight
Opacity)
0 to 100.0
Beveled edge
Lowlight
part
Highlight
part
Light
source
direction