Sony DCR-TRV15E, Руководство по обслуживанию

Страница: 53 / 188

1-44
190
Symptom Cause and/or Corrective Actions
• Moisture condensation has occurred.
c
Remove the cassette and leave your camcorder for at
least one hour to acclimatise. (p. 211)
• Some troubles have occurred in your camcorder.
c
Remove the cassette and insert it again, then operate
your camcorder.
• Disconnect the mains lead of the AC power adaptor or
remove the battery, then reconnect it in about one minute.
Turn the power on. If the functions still do not work, open
the LCD panel and press the RESET button at bottom left
of
z REC button using a sharp-pointed object. (If you
press the RESET button, all the settings including the date
and time return to the default.) (p. 226)
• The battery pack is not properly installed.
c
Install it properly.
• Something is wrong with the battery pack.
c
Contact your Sony dealer or local authorised Sony
service facility.
• The POWER switch is not set to OFF (CHG).
c
Set it to OFF (CHG).
The melody or beep sounds for five
seconds.
No function works though the
power is on.
While charging the battery pack, no
indicator appears or the indicator
flashes in the display window.
You cannot charge the battery pack.
Types of trouble and their solutions
191
Troubleshooting
Поиск и устранение неисправностей
English
Self-diagnosis display
C:21:00
Five-digit display Cause and/or Corrective Actions
• You are using a battery pack that is not an
“InfoLITHIUM” battery pack.
c
Use an “InfoLITHIUM” battery pack. (p. 206)
• Moisture condensation has occurred.
c
Remove the cassette and leave your camcorder for at
least one hour to acclimatize. (p. 211)
• The video heads are dirty.
c
Clean the heads using the cleaning cassette (optional).
(p. 212)
• A malfunction other than the above that you can service
has occurred.
c
Remove the cassette and insert it again, then operate
your camcorder.
c
Disconnect the mains lead of the AC power adaptor or
remove the battery pack. After reconnecting the power
source, operate your camcorder.
• A malfunction that you cannot service has occurred.
c
Contact your Sony dealer or local authorized Sony
service facility and inform them of the 5-digit code.
(example: E:61:10)
If you are unable to rectify the problem even if you try corrective actions a few times, contact your
Sony dealer or local authorized Sony service facility.
Your camcorder has a self-diagnosis display
function.
This function displays the current condition of
your camcorder as a 5-digit code (a combination of
a letter and figures) in the viewfinder, on the LCD
screen or in the display window. If a 5-digit code is
displayed, check the following code chart. The last
two digits (indicated by
ss ) will differ depending
on the state of your camcorder.
C:21: ss
LCD screen, Viewfinder or
Display window
Self-diagnosis display
•C: ss : ss
You can service your camcorder
yourself.
•E: ss : ss
Contact your Sony dealer or local
authorized Sony service facility.
E:61: ss
E:62: ss
C:31: ss
C:32: ss
C:04: ss
C:22: ss
192
English
Warning indicators and messages
100-0001 Warning indicator as to file
Slow flashing:
•The file is corrupted.
•The file is unreadable.
•You are trying to carry out MEMORY MIX
function on moving picture.
C:21:00 Self-diagnosis display (p. 191)
E
The battery is dead or nearly dead
Slow flashing:
•The battery is nearly dead.
Depending on the operating conditions,
environment and battery condition, the
E
indicator may flash, even if there are
approximately 5 to 10 minutes remaining.
Fast flashing:
•The battery is dead.
%
Moisture condensation has occurred*
Fast flashing:
•Eject the cassette, turn off your camcorder,
and leave it for about 1 hour with the cassette
compartment open (p. 211).
Warning indicator as to cassette
memory*
Slow flashing:
•No tape with cassette memory is inserted
(p. 203).
Warning indicator as to “Memory
Stick”**
Slow flashing:
•No “Memory Stick” is inserted.
Fast flashing:
•The “Memory Stick” is not readable with
your camcorder (p. 131).
•The image cannot be recorded on “Memory
Stick” (p. 152).
If indicators and messages appear on the screen, check the following:
See the page in parentheses “( )” for more information.
Warning indicators
C:21:00 100–0001
Warning indicator as to “Memory Stick”
formatting**
Fast flashing:
• “Memory Stick” is not formatted correctly
(p. 119).
•The “Memory Stick” data is corrupted.*
Q
Warning indicator as to tape
Slow flashing:
•The tape is near the end.
•No tape is inserted.*
•The write-protect tab on the cassette is out
(red) (p. 27).*
Fast flashing:
•The tape has run out.*
Z
You need to eject the cassette*
Slow flashing:
•The write-protect tab on the cassette is out
(red) (p. 27).
Fast flashing:
•Moisture condensation has occurred (p. 211).
•The tape has run out.
•The self-diagnosis display function is
activated (p. 191).
-
The still image is protected*
Slow flashing:
•The still image is protected (p. 176).
Warning indicator as to the external flash
(optional)
Slow flashing:
•During charging.
Fast flashing:
•There is something wrong with the flash
(optional) while charging the battery pack.
* You hear the melody or beep sound.
** DCR-TRV17E only
193
Troubleshooting
Поиск и устранение неисправностей
Warning indicators and messages
Warning messages
•CLOCK SET Set the date and time (p. 24).
•FOR “InfoLITHIUM” Use an “InfoLITHIUM” battery pack (p. 206).
BATTERY ONLY
• CLEANING CASSETTE* 3) The video heads are dirty (p. 212).
• FULL The tape cassette memory is full.*
2)
• 16BIT AUDIO MODE is set to 16BIT (p. 120).* 2) You cannot
dub new sound.
• REC MODE REC MODE is set to LP (p. 120).* 2) You cannot dub
new sound.
• TAPE There is no recorded portion on the tape.* 2) You
cannot dub new sound.
• “i.LINK” CABLE i.LINK cable is connected (p. 105).*
2)
You cannot dub
new sound.
• FULL* 1) The “Memory Stick“ is full (p. 144).* 2)
•
-
* 1) The write-protect tab on the “Memory Stick“ is set to
LOCK (p. 131).*
2)
• NO FILE* 1) No still image is recorded on the “Memory Stick“
(p. 160).*
2)
• NO MEMORY STICK*
1)
No “Memory Stick“ is inserted.*
2)
• AUDIO ERROR* 1) You are trying to record an image with sound that
cannot be recorded by your camcorder on the
“Memory Stick” (p. 122).*
2)
• NO STILL IMAGE FILE* 1) No still image is recorded though you are trying to
print in the 9PIC PRINT mode.
• MEMORY STICK ERROR* 1) The “Memory Stick“ data is corrupted (p. 134).* 2)
• FORMAT ERROR* 1) The “Memory Stick” is not recognised. Check the
format (p. 119).*
2)
•
-
DIRECTORY ERROR*
1)
There are more than two same directories (p. 159).*
2)
•
Q
Z TAPE END The tape has reached the end of the tape.* 2)
•
Q
NO TAPE Insert a cassette tape.* 2)
•DELETING You have pressed PHOTO during deleting all images
on “Memory Stick”.
•FORMATTING You have pressed PHOTO during formatting a
“Memory Stick”.
* 1) DCR-TRV17E only
* 2) You hear the melody or beep sound.
* 3) The
x
indicator and “ CLEANING CASSETTE” message appear one after
another on the screen.