Sony Bravia KDL-26S4000, Руководство по эксплуатации

Страница: 4 / 40

4
GB
Start-up Guide
1: Checking the accessories
Stand (1) and screws (3) (KDL-37S4000/32S4000/
26S4000)
Carrying handle (1) and screws (4) (KDL-20S4000)
Remote (1)
Size AA batteries (R6 type) (2)
To insert batteries into the remote
~
• Observe the correct polarity when inserting
batteries.
• Do not use different types of batteries together or
mix old and new batteries.
• Dispose of batteries in an environmentally
friendly way. Certain regions may regulate the
disposal of batteries. Please consult your local
authority.
• Handle the remote with care. Do not drop or step
on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat
source, a place subject to direct sunlight, or a
damp room.
2: Attaching the stand
(except for KDL-20S4000)
1
Place the TV onto the stand by aligning
the
screw hole alignment lines over the stand
as shown.
2
Fix the TV to the stand according to the
arrow marks
that guide the screw holes
using the supplied screws.
~
• This TV is very heavy, so two or more people
should place the TV on the stand.
• If using an electric screwdriver, set the tightening
torque at approximately 1.5N·m (15kgf·cm).
• When installing the TV onto the wall, follow step
1 to prevent the TV panel from falling over.
3: Attaching the carrying
handle (for KDL-20S4000)
1
Place the TV with its screen facing down
on a stable cloth-covered work surface.
Push and lift the cover to open.