Sony Bravia KDL-26S4000, Руководство по эксплуатации

Страница: 38 / 40

38
GB
Sound
The picture is good, but there
is no sound. • Press 2 +/– or % (Mute).
• Check if the “Speaker” is set to “TV Speaker” (page 30).
• When using HDMI input with Super Audio CD or DVD-Audio,
DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.
Channels
You cannot select your desired
channel. • Switch between digital and analogue mode, and select the desired
digital/analogue channel.
Some channels are blank. • The channel is for scrambled/subscription service only. Subscribe to a
pay TV service.
• The channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.
You cannot view digital
channels. • Contact a local installer to find out if digital transmissions are provided
in your area.
• Upgrade to a higher gain antenna.
General
The TV turns off
automatically (the TV enters
standby mode). • Check if the “Sleep Timer” is activated, or confirm the “Duration”
setting of “On Timer Settings” (page 28).
The TV turns on
automatically. • Check if the “On Timer Settings” is activated (page 28).
Some input sources cannot be
selected. • Select “Video Labels” and cancel the “Skip” setting for the input source
(page 30).
The remote does not function. • Replace the batteries.
You cannot add a channel to
the Favourite list. • Up to 999 channels can be stored in the Favourite list.
HDMI equipment does not
appear on “HDMI Device
List”. • Check that your equipment is compatible with control for HDMI.
You cannot select “Off” in
“Control for HDMI”. • If you have connected any audio system that is compatible with control
for HDMI, you cannot select “Off” in this menu. If you want to change
the audio output to the TV speaker, select “TV Speaker” in the
“Speaker” menu (page 30).
Not all channels are tuned for
cable. • Check the support website for cable provide information.
http://www.sony-asia.com/bravia/flash.html
The auto tuning procedure
takes a long time. • If you have connected the VCR to the TV, we recommend inserting a
pre-recorded tape into a VCR before you start auto tuning for fast tuning.
Cancel the auto tuning, and insert a pre-recorded tape into a VCR
connected to the TV. Then select “Auto Start-up” (page 29) to make the
initial set-up again.
Condition Explanation/Solution