Sony Bravia KDL-26S4000, Руководство по эксплуатации

Страница: 31 / 40

31
GB
Using
MENU F
uncti
ons
HDMI Set-up Allows the TV to communicate with the connected “Control for HDMI”
compatible equipment. Note that communication settings must also be made on the
connected equipment.
Control for HDMI Sets whether or not to link the operations of the TV and the
connected equipment that is compatible with control for
HDMI. When set to “On”, the following menu items can be
performed.
If the specific Sony equipment that is compatible with control
for HDMI is connected, this setting is applied to the
connected equipment automatically when the “Control for
HDMI” is set to “On” using the TV.
Auto Devices Off When this is set to “On”, the connected equipment that is
compatible with control for HDMI turns off when you switch
the TV to standby mode using the remote.
Auto TV On When this is set to “On”, the TV turns on when you turn on
the connected equipment that is compatible with control for
HDMI.
Device List
Update Creates or updates the “HDMI Device List”. Up to 11
compatible equipment items can be connected, and up to 5
equipment items can be connected to a single jack. Be sure to
update the “HDMI Device List” when you change the
connections or settings. If the specific Sony equipment that is
compatible with control for HDMI is connected, “Control for
HDMI” is applied to the connected equipment automatically
when the “Device List Update” is executed on the TV.
HDMI Device List Displays the connected “Control for HDMI” compatible
equipment.
~
• You cannot use “Control for HDMI” if the TV operations are linked to the
operations of an audio system that is compatible with control for HDMI.
Product Information Displays product information of the TV.
Factory Settings Resets all settings to factory settings except for the “Programme Block” setting,
“Digital Favourites” setting, and programme preset data. After completing this
process, the initial set-up screen is displayed. Completing auto tuning in initial set-
up will reset the settings that are not reset by “Factory Settings”. To retain the
settings, select “Cancel” in the auto tuning confirmation dialog.
~
• Do not turn off the TV or press any buttons during “Factory Settings” (takes
about 30 seconds).
Analogue Set-up
Programme List
Display Select “Off” to hide the list of analogue channels from the XMB™
(XrossMediaBar).
1 Digit Direct Select “On” to select a channel using one preset number button (0 – 9) on the
remote.
~
• When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and
above entering two digits using the remote.
Auto Tuning Tunes in all the available analogue channels.
You can retune the TV after moving house, or to search for newly launched
channels.
(Continued)