Sony BKP-5090, Руководство по установке и обслуживанию

Страница: 71 / 138

4-11 (E)
BKP-5090
4-1-3. Maintenance Menu
The Maintenance menu is used for encoder output level and other adjustments items necessary for
camera’s maintenance. The Maintenance menu is not normally accessible. To display this menu, switch
setting of the AT-126 board is required.
To activate the Maintenance menu, first display the TOP menu.
(Boxed items under “Settings” indicate the factory setting.)
Page Ver. Item Settings Contents
VBS SYNC Level _ 99 to 99 (
[XX]
) Adjusts the sync level of camera’s encoder output signal.
Y Level _ 99 to 99 (
[XX]
) Adjusts the Y level of camera’s encoder output signal.
Burst Level _ 99 to 99 (
[XX]
) Adjusts the burst level of camera’s encoder output signal.
Chroma Level _ 99 to 99 (
[XX]
) Adjusts the chroma level of camera’s encoder output signal.
Q/V Level
_
99 to 99 (
[XX]
) Adjusts the Q (or V) level of camera’s encoder output signal.
Setup Level _ 99 to 99 (
[XX]
) Adjusts the sync level of camera’s encoder output signal.
(This setting is valid only for NTSC.)
BF Phase
_
99 to 99 (
[XX]
) Adjusts the burst phase of camera’s encoder output signal.
SC-H Phase _ 99 to 99 (
[XX]
) Adjusts the SC-H phase of camera’s encoder output signal.
V Blanking 19,
[20]
,21H Adjusts the V blanking width of camera’s encoder output signal.
(This setting is valid only for NTSC.)
In connection with CCU, the width is fixed to 19H.
*
For a PAL model, the width is fixed to 25H at all times.
White V Saw R/G/B _ 99 to 99 (
[XX]
) Adjusts the volume of V.Saw compensation for the R, G, or B white shading.
Shading V Para R/G/B _ 99 to 99 (
[XX]
) Adjusts the volume of V.Para compensation for the R, G, or B white shading.
H Saw R/G/B
_
99 to 99 (
[XX]
) Adjusts the volume of H.Saw compensation for the R, G, or B white shading.
H Para R/G/B _ 99 to 99 (
[XX]
) Adjusts the volume of H.Para compensation for the R, G, or B white shading.
White R/G/B
_
99 to 99 (
[XX]
) Adjusts the R, G, or B white level.
V MOD R/G/B/M _ 99 to 99 (
[XX]
) Adjusts the volume of V.Saw compensation for the R, G, B or master
modulation shading of the lens and prism.
j )
V MOD On,
[Off]
Turns the V modulation shading on and off.
Auto White Throw MENU SELECT Starts to automatically adjust the white balance.
switch to ENTER
to execute.
Clear Throw MENU SELECT Resets numeric settings to “0” on the White Shading page.
switch to ENTER (When you throw MENU SELECT switch to ENTER, the “Clear”
to execute. indication flashes. Throw MENU SELECT switch to ENTER again to
execute; throw to CANCEL to cancel.)
j ) When the master modulation shading is adjusted, the V. Saw component for the R and B V-modulation shadings of the prism is
simultaneously compensated.
4-1. Setup Menu (BVP-500 series)
4-1-3. Maintenance Menu