Sony BKP-5090, Руководство по установке и обслуживанию

Страница: 67 / 138

4-7 (E)
BKP-5090
4-1. Setup Menu (BVP-500 series)
4-1-2. Paint Menu
4-1-2. Paint Menu
The Paint menu is used for white and other paint adjustments items. To activate the Paint menu, first
display the TOP menu.
(Boxed items under “Settings” indicate the factory setting.)
Page Ver. Item Settings Contents
Video Level White R/G/B
_
99 to 99 (
[0]
) Adjusts the R, G, B gain level.
Black R/G/B/M _ 99 to 99 (
[0]
) Adjusts the R, G, B master black level.
Flare R/G/B _ 99 to 99 (
[0]
) Adjusts the R, G, B flare level.
Gamma R/G/B/M _ 99 to 99 (
[0]
) Adjusts the R, G, B master gamma correction curve.
BlkGam _ 99 to 99 (
[0]
) Adjusts the R,G,B and master black gamma to adjust the rising block of
R/G/B/M the gamma correction curve
Flare
[On]
, Off Turns the flare correction circuit on and off.
Test 1, 2,
[Off]
Selects the test signal.
1
: Outputs the sawtooth waveform test signal
2 : Outputs 3-step waveform test signal
Off : no test signal is output
Clear Throw MENU SELECT Sets all settings on the Video Level page to 0.
switch to ENTER (When you throw MENU SELECT switch to ENTER, the “Clear”
to execute. indication flashes. Throw MENU SELECT switch to ENTER again to
execute; throw to CANCEL to cancel.)
Detail 1 Detail
[On]
, Off Turns the function on and off to improve resolution by adding the detail signal.
Level _ 99 to 99 (
[0]
) Adjusts the master level for the detail signal.
Limitter
_
99 to 99 (
[0]
) Adjusts the clipping level against the maximum detail level.
Crispening _ 99 to 99 (
[0]
) Adjusts the level at which the detail signal is crispened.
Level DEP.
_
99 to 99 (
[0]
) Adjusts the level to control the detail signal used at lower signal level.
Level DEP.
[On]
, Off Turns the level depend function on and off.
FineDetail _ 99 to 99 (
[0]
) Adjusts the fine detail waveform in thickness
FineDetail
[On]
, Off Turns the fine detail function on and off
Test 1, 2,
[Off]
Selects the test signal.
1
: Outputs the sawtooth waveform test signal
2 : Outputs 3-step waveform test signal
Off : No test signal is output
Clear Throw MENU SELECT Sets all settings on the Detail 1 page to 0.
switch to ENTER (When you throw MENU SELECT switch to ENTER, the “Clear”
to execute. indication flashes. Throw MENU SELECT switch to ENTER again to
execute; throw to CANCEL to cancel.)