Sony BKP-5090, Руководство по установке и обслуживанию

Страница: 79 / 138

4-19 (E)
BKP-5090
4-1. Setup Menu (BVP-500 series)
4-1-6. System Config Menu
Page Ver. Item Settings Contents
Others2 F Tally RVS
[On]
, Off Selects the operation mode of TALLY lamps corresponding to a CALL
button pressed when a TALLY signal is input to the camera from CCU
or VTR.
On : Red TALLY lamps of VF and UP TALLY lamps of VF and
camera go out.
Off : Red TALLY lamps of VF alone go out.
CHAR CAM No. 1,2,3 , A,B,C Selects the indication mode of the camera number set by the CAMERA
ID. page of Operation menu.
1, 2, 3 : Indicates in numerics.
A, B, C : Indicates camera numbers 1 to 27 in alphabetical order of A to Z.
(When connecting 28 or more cameras, select “1,2,3”.)
WHT Setup
[AWB]
, LEVEL AWB : After executing the Auto Level, white balance adjustment
Mode data returns to the value before execution.
LEVEL : After executing the Auto Level, white balance adjustment
data changes to the value after the white balance is adjusted
using Test 2 signal.
AW Shading
[RGB]
, RB Only RGB : When automatically adjusting the white balance, R, G, and
Mode B signal waveforms are all flattened.
RB Only : When automatically adjusting the white balance, R and B
signal waveforms are flattened.
Talk Priority
[TALK|1]
, TALK 2 (Does not function in the unit.)
Canon U-4 On,
[Off]
(Does not function in the unit.)
Mode
W Gain On,
[Off]
Turn the function on and off to select up to 36 dB master gain for each
gain switch position (LOW, MIDDLE, HIGH) of RM-P9 when the
standalone unit is installed in the unit
(This function is sometimes not activated depending on the type of OHB
which is incorporated in the camera.)
Sensitivity
[0]
, 6 dB 0: Normal mode
6: Select only when the gain is raised by 6 dB on the spot