Sony BKP-5090, Руководство по установке и обслуживанию

Страница: 74 / 138

4-14 (E)
BKP-5090
4-1-4. Reference File Menu
The Reference File menu stores the reference values used for automatic setup adjustment and the standard
settings of the switches as the reference files. And the menu can clear the current reference files.
The Reference File menu is not normally accessible. To display this menu, switch setting of the AT-126
board is required.
To activate the Reference File menu, first display the TOP menu.
m
1. Executing the File Store on the Reference File page registers settings of items, which have been set
through the Paint, Maintenance and System config menus just before the file store, as the reference
values.
2. When changed numbers of items are returned to the reference values stored as the reference files,
recall the standard file using an MSU/RCP or the setup menu.
Page Ver. Item Settings Contents
Reference File Store Throw MENU SELECT Stores the adjustment value on each item as the reference value.
File switch to ENTER twice
to execute.
Clear File Throw MENU SELECT Clears the adjustment values stored as the reference files.
switch to ENTER (Temporarily clears the current reference files
p)
.)
to execute.
p) If the power is turned off without execution of the File Store after clearing the file, the original setting is restored.
4-1-5. Trimming File Menu
The Trimming File menu stores the adjustment data in replacing parts as the trimming files. And the
menu can clear the current adjustment values. The Trimming File menu is not normally accessible.
To display this menu, switch setting of the AT-126 board is required.
To activate the Trimming File menu, first display the TOP menu.
n
Executing the File Store on the Trimming File page registers settings of items, which have been set
through the Maintenance and System config menus just before the file store, as the reference values.
Page Ver. Item Settings Contents
Trimming File Store Throw MENU SELECT Stores the adjustment value on each item as the reference value.
File switch to ENTER twice
to execute.
Clear File Throw MENU SELECT Clears the adjustment values stored as the triming files.
switch to ENTER (Temporarily clears the current triming files
p)
.)
to execute.
OHB File File Store Throw MENU SELECT Stores specific data for a CCD unit to be used as the OHB files.
switch to ENTER twice The standard values are stored at the factory.
to execute. (Stores the offset value, OHB matrix data and so on.)
Lens File Lens File Throw MENU SELECT Stores specific data for a lens to be used as the lens files.
Store switch to ENTER The standard values are stored at the factory.
to execute.
Select
[0]
to 49 Loads a lens data into the lens file selected at present by the Lens
Current File page of the Operation menu.
Lens
Reset Throw MENU SELECT Resets all of 16 lens files.
All Lens switch to ENTER (Example) No. : 1
←
Lens stored number (0 to 49)
to execute. Lens:25:A8.5 x 5.5
←
Lens name
EX: 1.0
←
Lens extender value
p) If the power is turned off without execution of the File Store after clearing the file, the original setting is restored.
4-1. Setup Menu (BVP-500 series)
4-1-4. Reference File Menu
4-1-5. Trimming File Menu