Sontex Supercal 5 I, Инструкция по эксплуатации

Страница: 50 / 68

50 Instruction for use | Supercal 5
11.2 Power Supplies
The Supercal 5 is always supplied with a battery and can also be supplied with mains power
supply module. These can be modified and retrofitted at any time.
11.2.1 Mains Modules
12- 24 VDC or 12- 36 VAC Article number: SC5X00011
Type safety extra-low voltage
Voltage tolerance +10/–15 %
Relative Humidity 93 %
Galvanic isolation Yes
110- 230 VAC – 50 / 60 Hz. Article number SC5X00012
Type Protection class II
Frequency 50/60 Hz
Input voltage range 90–260 V
Relative Humidity 93 %
Protection 6A
11.2.2 Battery Modules
Lithium D – Cell Article Number SC5X00010
Nominal voltage 3,6 V
Life up to 12 +1 year (in combination with
self-sufficient flow sensors)
Maximum ambient temperature 55 °C
Backup battery
type A (standard ANSI) with connector
Nominal voltage 3,6 VDC
Nominal capacity min. 4,1 Ah
Maximum ambient temperature 55 °C
11.2.3 Estimating the Battery Life of an M-Bus Application
The battery life of Supercal 5 doesn’t depend on any of these parameters:

Number of M-Bus devices attached to the M-Bus network

Network specifications, communication speed

Ambient temperature (5 °C–55 °C)
11.3 Measurement concept

The Supercal 5 measurement calculation is based on volume calculation. The number of
electrical pulses determines the volume directly.

Once the volume is determined, the flow rate is calculated according to this volume, and
the time taken for the pulses to occur.

The heat transfer is calculated from flow rate and the difference between “high temper -
ature” and “low temperature”.

The heat capacity and density of the heat transfer medium are included in the calcula-
tion.