Sontex Supercal 5 I, Инструкция по эксплуатации

Страница: 16 / 68

16 Instruction for use | Supercal 5
4.5 Dimensions
159.6
163.6
136.3
138.3
49
5.5
23.2
175.1
95.08
143
158
53.5
3.9
4.6 Mounting
4.6.1 Before Mounting

All cables must be laid
at least 300 mm away from
power and high-
frequency cables.

Radiant heat and electrical interference fields in the vicinity of the
calculator must be avoided.

The calculator must generally be mounted away from the hot or cold
pipes.

Ensure no condensation can run into the calculator along the connected
lines.

If there is a risk of vibration in the piping system, the calculator should
be mounted separately on the wall.

For medium temperatures above 90 °C, the calculator should be
mounted separately.

The flow sensor should be mounted between two shut-off valves.

The direction of flow in the flow sensor must be adhered to (arrow on
the flow sensor).

The pipeline must be flushed before mounting the flow sensor to ensure
that there are no foreign bodies in the pipeline.

The lines must be vented during commissioning. Air in the system or in
the flow sensor can impair the measurement result.

Only use suitable new sealing material.

The tightness of the various connections must be checked.

Lightning protection cannot be guaranteed; this must be ensured via
the house installation.