Sontay SonNet Trend, Техническое руководство

Страница: 33 / 220

31 Issue 1, Jun. 2014
4
CONFIGURATION GUIDE
This section will describe the process of allowing the data recorded by SonNet ‘
End devices
’
connected to a SonNet RF-RXS wireless receiver communicating with this product to be
monitored by the BeMS. It will explain the specific configuration,

used to identify each
‘
End device
’ in this product

of the communication protocols used by the hardware connected to the product

of the parameters used to specify the data that will be accessed by the Trend BeMS
4.1 THE CONFIGURATION PAGES
Each product can only be configured via a number of associated
‘ Configuration’
pages. The
pages are password protected to prevent unauthorised access to the parameters that define the
operation of this product.
Note The interface configuration pages operate using HTML5 making the pages
available via a number of hardware variants.
The Configuration options, available from a fly out on the left side of the screen includes the

‘
Map points
’ page used to determine the link the required ‘
End device
’ parameters, to a
specific vIQ OS module.

‘
vIQ
’ used to determine the connection to the Trend network and display the value from a
defined
‘
End device
’ parameters.

‘
vIQ Calculator
’ page used to manipulate an
output value from a selected vIQ OS module
that can be written to another vIQ OS module.

‘
Local IP settings
’ page used to define the
unique identity of this product on the IP (Internet
Protocol) network.

‘
Comms settings
’ page to define the
communications parameters used when
connected to the SonNet RF-RXS wireless
receiver and the connection to the Trend
network.
Remember All changes MUST be confirmed using
‘Save’ (or ‘Save and reboot’).