Sontay SonNet Trend, Техническое руководство

Страница: 185 / 220

SIP SonNet-Trend - Interface Range
Contents
1 INTRODUCTION ...................................................................................................................................... 1
1.1 THE UNIT 3
1.1.1 Front Panel Annunciation ............................................................................................................... 3
1.1.2 Button and Switches ....................................................................................................................... 4
1.2 SYSTEM OVERVIEW .............................................................................................................................. 5
1.2.1 SonNet Network ............................................................................................................................. 6
1.2.2 Trend Network ................................................................................................................................ 6
2 HARDWARE GUIDE ................................................................................................................................ 7
60 Issue 1, Jun. 2014
54.
Select the
‘
OS
’ and press the ‘
Switches
’ option to display the Switch module configuration
parameters.
xxvi.
Locate
the ‘
Index
’ number corresponding to the Module number configured on the ‘
Map
points
’ page.
xxvii.
Enter text used to identify the parameter
in the ‘
Label
’ field. This is used to identify the
parameter in the controller. It should be a concise description of the parameter.
Caution
The ‘Label’ does not support ‘
\ / ( { ; , :
’ invalid characters.
xxviii.
Inspect
the ‘
Status
’. This shows the current condition of the corresponding
parameter
in the ‘Switch’ module, where 
is 1, True, Enabled or On.
Note If an authorisation level has been configured, an appropriate pin number must be
entered correctly before a write command to this module type can be confirmed.
xxix.
Enter
the required ‘
Pin level
’ number. This is the authorisation level used to prevent un-
authorised access to the parameter. A Pin level number should already have been
configured via the ‘
Users
’ page (see
Configure the Pin Level Authorisation
).
Tip!
Press ‘Copy/paste data’ button to display a dialog. Use ‘Copy to clipboard’ to add
all the module information (excluding Status) to the computer clipboard, or click
the right hand mouse button i
n the white square and select ‘Paste’ from the