Sontay SonNet Trend, Техническое руководство

Страница: 104 / 220

8 Issue 1, Jun. 2014
CONFIGURE THE MODULE AUTHORISATION
Occasionally authorisation may be used to control which users are permitted to change Trend
‘
Knobs
’ and ‘
Switches
’ module parameters in a specific group of OSs. Groups of one or more
OSs can be protected using a
‘
Pin number
’, associated with a ‘
Pin level
’. The Trend ‘
Knobs
’
and ‘
Switches
’ module value will only be changed when a valid pin number is entered.
Note The
‘Pin Number’ and ‘Pin Level’ are configured via the ‘Users’ page in the ‘vIQ’
configuration pages.
12.
Press
‘ ’ on the ‘
Map points
’ page to display the ‘
Trend Security
’ dialog.
This dialog shows the OS (LAN and OS number) associated
with the configured ‘
Pin
number
’.
i.
Press
‘ ’ to create a
required ‘
Pin number
’ configuration.
Caution Pin Level security is only enabled if
the
‘Users’ configuration page in the
‘vIQ’ configuration pages is defined.
ii.
Enter a required pin number, i.e. a 4
(four) digit number defined on the
‘
Users
’ page in the ‘
vIQ
’ configuration
pages, (see
Configure the Pin Level
Authorisation
).
Note
Press ‘ ’ to delete the
Trend security ‘Pin number’
configuration.
iii.
Press ‘
Choose Lan & OS
’ and select the required vIQ OSs from the list of available
OSs, as necessary.
Note
Press ‘ ’ to remove the vIQ OS from the Trend security ‘Pin
number’ configuration.
13.
Press
‘
Save
’ to confirm the ‘
Trend Security
’ changes.
Associated
Pin Number
vIQ OS requiring
defined ‘Pin number’