Sontay SonNet Trend, Техническое руководство

Страница: 105 / 220

8 Issue 1, Jun. 2014
10.3.4
Configure the Back up and Restore
The
‘
Back up
’ function generates a copy of the configuration in this product to be protected in a
secure environment protecting it from user error, hardware failure, and other problems. It creates
a back up of the configuration
(IP settings, Comms settings, SonNet ‘
End devices
’, mapping to
vIQ OS, vIQ OS configuration, and Sensors plot files) to a defined media/location which can be
used to restore this product to an earlier state (see
Restore a Previous Configuration
).
Tip!
Use ‘ ’ (Save Plots to Flash on the ‘vIQ Pages’) before performing a ‘Back
up’. This ensures the latest values are saved (in the plot) and may prevent the
loss of data before using the ‘Restore’ function.
Remember
Use the back up function (‘Back up and restore’ page), after checking the
configuration changes operate correctly and before performing any additional
changes. This will ensure this product can be restored to a known operating
condition without losing excessive data if it is not possible to complete the
configuration changes.
The ‘
Restore
’ function supports the use of

A ‘
Back up file
’ to restore the configuration to a usable state following a serious data loss,
i.e. disaster recovery

An ‘
Update file
’ (available from Technical Support) to update the product firmware that
improves functionality.
CREATE A BACK UP FILE
To create a back up file
14.
Press ‘ ’ to reveal the configuration options from the left side of the screen and select
‘
Backup and restore
’ to display the site management page.
15.
Press
‘
Back up
’ to automatically create a site
configuration file. When the file has been
created, save the file to an appropriate
location.
Note
Instructions for saving the ‘Backup’
file to a known location is dependent
on the web browser and hardware
being used.
RESTORE A PREVIOUS CONFIGURATION