Sontay SonNet Trend, Техническое руководство

Страница: 101 / 220

8 Issue 1, Jun. 2014
10.3.3
Configure the Map points
The ‘
Map points
’ page displays settings used to assign SonNet ‘
End device
’ and selected
parameters to a specific virtual OS (‘
vIQ
’) and module Index Number, respectively.
To map SonNet ‘
End device
’ parameters
9.
Press ‘ ’ to reveal the configuration options from the left side of the screen and select
‘
Map points
’ to display a table that will be configured to show selected SonNet ‘
End device
’
parameters.
Caution The SonNet devices network map shows all the Sonnet devices authorised by the
SonNet RF-RXS wireless receiver. SonNet
‘End devices’ MUST be authorised
before commissioning this product.
Tip! A list of detected SonNet
‘End devices’ are automatically displayed in the SonNet
devices network map on the left of the ‘Map points’ page.

Use ‘ ’ to update the map of all authorised SonNet ‘
End devices
’. This occurs
automatically at startup.

Use ‘ ’ to update the details of the authorised SonNet ‘
End devices
’. The
‘
End devices
’ icon to the left of the device name indicates what is known about the
device, but may take up to 15mins to completely update.
Note
SonNet ‘End device’ parameters display a colour-coded icon next to the
parameter name according to the current state of configuration. A yellow icon
indicates the parameter is in
cluded in the ‘Map points’ page but is NOT saved yet,
a green icon indicates the parameter is included in the ‘Map points’ page and
saved.