Sontay SonNet Trend, Техническое руководство

Страница: 182 / 220

SIP SonNet-Trend - Interface Range
Contents
1 INTRODUCTION ...................................................................................................................................... 1
1.1 THE UNIT 3
1.1.1 Front Panel Annunciation ............................................................................................................... 3
1.1.2 Button and Switches ....................................................................................................................... 4
1.2 SYSTEM OVERVIEW .............................................................................................................................. 5
1.2.1 SonNet Network ............................................................................................................................. 6
1.2.2 Trend Network ................................................................................................................................ 6
2 HARDWARE GUIDE ................................................................................................................................ 7
57 Issue 1, Jun. 2014
xxv.
Enter the appropriate engineering data value type in
the ‘
Unit
’ field. This appears in the BeMS and is used
to identify the engineering data value recorded, i.e. A
(amps) if scaling a value measuring a mA signal.

If necessary, enter a value used to specify the
maximum value allowed in ‘
T. Lim.
’ and/or minimum
value allowed in the ‘
B. Lim.
’. This is used to define
the maximum and/or minimum value that can be
written to the parameter using the corresponding
engineering units.

Enter the
required ‘
Pin level
’ number. This is the authorisation level used to prevent
un-
authorised access to the engineering data. A ‘
Pin level
’ number should already have
been configured via the ‘
Users
’ page (see
Configure the Pin Level Authorisation
).
Tip!
Press ‘Copy/paste data’ button to display a dialog. Use ‘Copy to clipboard’ to add
all the module information (excluding Values) to the computer clipboard, or click
the right hand mouse button in the white square and select ‘Paste’ from the
context menu to add copied information to the Module page. Module information
can be edited using .CSV editing software, e.g. Microsoft Excel.
53.
Press
‘
Save
’ to confirm the Trend ‘
Knobs
’ Module changes.
Max
Min
T. Lim
B. Lim
Write max.
value
Write min.
value