SonicWALL SuperMassive 9800, Руководство по началу работы

Страница: 47 / 76

SonicWall SuperMassive 9800 Getting Started Guide 47
• Click Synchronize Settings to synchronize the settings
between the Primary and Secondary appliances.
• Click Synchronize Firmware if you previously uploaded
new firmware to your Primary appliance while the
Secondary appliance was offline.
• Click Force Active/Standby Failover to force a failover
between your Primary and Secondary appliances.
HA License Configuration Overview
You can configure HA license synchronization by associating
two SonicWall security appliances as HA Primary and HA
Secondary on MySonicWall.
You must purchase a single set of security service licenses for
the HA Primary appliance. To use Stateful HA, you must first
activate the Stateful High Availability Upgrade license for the
primary unit in SonicOS. This is automatic if your appliance is
connected to the Internet. See Registering, Licensing, and
Upgrading on page 27 .
License synchronization is used during HA so that the
Secondary appliance can maintain the same level of network
protection provided before the failover.
Completing HA Pair Association
You need to associate the two appliances on MySonicWall. The
second appliance share the Security Services licenses of the
primary appliance automatically.
If the second appliance has not yet been registered, follow the
steps listed in Registering, Licensing, and Upgrading on page 27
to register it. This is necessary to make it available for HA
association with the Primary.
After both appliances are registered, associate the two
SonicWall appliances.
To associate the two appliances:
1 Log in to your MySonicWall account.
2 Click My Products from the left navigation bar.
3 On the My Products page, scroll down to find the
appliance that you want to use as the Primary
appliance. Click the product Name or Serial Number .
4 On the Service Management page, scroll down to the
Associated Products section.
5 Under Associated Products , click High Availability
Secondary .