SonicWALL SuperMassive 9800, Руководство по началу работы

Страница: 17 / 76

SonicWall SuperMassive 9800 Getting Started Guide 17
Recording Configuration
Information
Use this section to record your configuration information. Be
sure to keep it for future reference.
The default MGMT interface IP address is
192.168.168.168
.
Registration Information
Networking Information
Serial Number: Record the serial number found
on the bottom panel of your
SonicWall appliance.
Authentication Code: Record the authentication code
found on the System > Status
page,
showstatus
from the
CLI, or the bottom panel of your
SuperMassive appliance.
LAN IP Address: Select a static IP address for your
SonicWall appliance that is within
range of your local network.
(default is
10.10.10.10
for
X0/LAN)
Subnet Mask: Record the subnet mask for the
local network (default mask is
255.255.255.0
). Client
devices connecting through the
appliance LAN interface are
assigned IP addresses in this
network (default client addresses
assigned by the SonicOS DHCP
server are on the
192.168.168.0
/
24
subnet).
Ethernet WAN IP Address: Select a static IP address for your
Ethernet WAN interface (X1).
NOTE: This setting only applies if
you are using an ISP that assigns a
static IP address.