SonicWALL SuperMassive 9800, Руководство по началу работы

Страница: 42 / 76

42 SonicWall SuperMassive 9800 Getting Started Guide
• X20—DMZ
NAT policies allow the flexibility to control Network Address
Translation based on matching combinations of Source IP
address, Destination IP address, and Destination Services.
Policy ‐ based NAT allows you to deploy different types of NAT
simultaneously.
For configuration procedures and information regarding the
different types of NAT policies, such as Many ‐ to ‐ One, One ‐ to ‐
One, or One ‐ to ‐ Many Load Balancing, refer to the SonicOS
Administration Guide .
Configuring a Stateful HA Pair
This section provides instructions for configuring a pair of
SonicWall SuperMassive 9800 appliances for Stateful High
Availability (HA). This section is relevant to administrators
following deployment Scenario B: Stateful HA Pair on page 39 .
A Stateful HA pair operates in NAT mode by default, similar to
Scenario A: NAT Mode Gateway on page 39 , with the added
benefit of high availability.
Topics:
• Initial High Availability Setup on page 43
• Configuring High Availability Settings on page 43
• Configuring HA Monitoring Settings on page 44
• Configuring Optional HA Settings on page 45
• HA License Configuration Overview on page 47
• Completing HA Pair Association on page 47
• Verifying High Availability Setup on page 48
SonicWALL SuperMassive 9800
CONSOLE
SDHC
MGMT X23 X21
X20 X6 X4
1GE 10GE
X2 X0
X1 X3 X5 X7
X22
B0
B1
ALARM
TEST
PWR 1 PWR 2
X14 X12 X18 X16 X10 X8
X9 X11 X13 X15 X17 X19
80GB
SSD
80GB
SSD
SonicWall SuperMassive 9800
CONSOLE
SDHC
MGMT X23 X21
X20 X6 X4
1GE 10GE
X2 X0
X1 X3 X5 X7
X22
B0
B1
ALARM
TEST
PWR 1 PWR 2
X14 X12 X18 X16 X10 X8
X9 X11 X13 X15 X17 X19
80GB
SSD
80GB
SSD
SonicWall
HA/Failover Pair
SonicWall SuperMassive 1
SonicWall SuperMassive 2
HA Control Link
Local Network
Internet
HA Data Link
IMPORTANT: Both units in a High Availability pair must
be the same model running the same firmware version.