SonicWALL SuperMassive 9800, Руководство по началу работы

Страница: 21 / 76

SonicWall SuperMassive 9800 Getting Started Guide 21
• Green indicates 100 Mbps
• An unlit left LED with the right LED lit indicates 10 Mbps
Using the Setup Wizard
When you are ready to begin initial setup, configure your
management computer with a static IP address on the
192.168.168.0/24
subnet, such as
192.168.168.20
.
This allows your computer to connect to SonicOS via the
MGMT interface.
To configure initial settings using the Setup Wizard:
1 With your computer connected to the appliance MGMT
port, start your Web browser and navigate to the
default MGMT interface IP address:
http://192.168.168.168
.
The initial screen displays the options to launch the
Setup Wizard or configure the appliance manually.
2 Launch the SonicWall Setup Wizard by clicking the first
here link. This wizard helps you quickly configure the
SonicWall appliance to secure your Internet
connection.
3 Follow the on ‐ screen prompts to complete the admin
password and network settings.
If a DHCP server is available on the network, the wizard
requests IP settings from it. You can click Next to accept
these or click Manual Config to enter a static IP address
and other network settings.
In the Manual Configuration page, click Retry to revert
to DHCP, or enter your own settings, and then click
Next .
NOTE: Be sure to disable pop ‐ up blocking software, or
set your Web browser to allow pop ‐ ups and cookies.