animeo KNX/EIB 4 AC MoCo • REF. 5050779 -
14/31
Selection priority
Automatic/manual
Options:
No
Yes
With this parameter the configurations for the priority become visible. The objects necessary for it appear simultaneously.
Motor 1…4
Automatic/manual functions
Options:
None
Priority automatic functions
Priority manual functions
None:
The moving commands are processed in detailed order.
Priority automatic function:
If an automatic command (1 Byte move command) takes place before a manual command (1 Bit move command), all manual
commands are disabled. Also the objects to move to the intermediate positions 1 and 2 (objects 16-25) are disabled. A manual
command is generated also over the local switch inputs or the radio hand transmitter. A tilting command (1 Bit) can however, always
be executed within the configured tilting time. A reset of the priority automatic function is effected if on the appropriate objects “Reset
priority“ (65-68) a telegram with the value “1” or “0“ is received. Switching between priority manual functions (value “0“) and priority
automatic functions (value “1“) is made by the appropriate objects (61-64). Following adjust-over, the appropriate priority is active
again in the reset state. This means for priority automatic functions that the manual commands become again disabled only through
the next automatic command.
Priority manual function:
If a manual command (1 Bit) takes place before an automatic command (1 Byte), all automatic commands are disabled. A manual
command is generated also over the local switch inputs or the radio hand transmitter. A reset of the priority manual functions is effected
if a telegram with the value “1” or “0“ is received on the appropriate object “Reset priority“ (65-68). Switching between priority
manual functions (value “0 “) and priority automatic functions (value “1“) is made by the appropriate objects (61-64). Following
adjust-over, the appropriate priority is active again in the reset state. This means for functions priority manual that the automatic
commands become again disabled only through the next manual command.
n
See explanations in chapter 0.
n
Over the priority manual functions the user has the possibility to disable the automatic functions. For example, over a timer the user
comfort can be defined. At 8:00 o’clock over the appropriate object (61-64) the priority manual functions are activated and the user can
move the end product to a desired position with the next manual command. At 5:00 o’clock the priority automatic function is again
activated. Over the appropriate object (61-64) it is always possible to switch between priority manual functions and priority automatic
functions.
To use timer functions it is ideal to use the central unit AS 315 N (Ref. 1860069).
