SOMFY Animeo KNX/EIB DRM Series, Руководство по установке

Страница: 18 / 31

animeo KNX/EIB 4 AC MoCo • REF. 5050779 -
18/31
Parameter card „Functions motor 1...4 / Functions motor 1-4“
Four individual parameter cards (Functions Motor 1...4) become visible if on the parameter card “General“ the basic adjustment of the motors
is set to “Individual“. Only one parameter card (Functions Motor 1-4) becomes visible, if on the parameter card “General“ the basic adjust-
ment of the motors is set to “Common“.
Intermediate position 1
UP / DOWN position (0 - 100 %)
Options: 0
0 - 100
With this parameter the intermediate position 1 “UP / DOWN“ is defined. The adusted value in % refers to the configured running time of the
appropriate venetian blind of the parameter cards Motor 1…4/Motor 1-4.
Slat position (0 - 100 %)
Options: 0
0 - 100
With this parameter the slat position of the intermediate position 1 is defined. The adjusted value in % refers to the configured complete
tilting time of the appropriate venetian blind of the parameter cards Motor 1…4/Motor 1-4.
n
Intermediate position 1 can be stored also over the conventional local switch or individually by radio hand transmitters per motor output.
The position learned last is valid.
Intermediate position 2
UP / DOWN position (0 - 100 %)
Options: 0
0 - 100
With this parameter the intermediate position 2 “UP / DOWN” is defined. The adjusted value in % refers to the configured running time of the
appropriate blinds of the parameter cards Motor 1…4/Motor 1-4.
Slat position (0 - 100 %)
Options: 0
0 - 100
With this parameter the slat position of the intermediate position 3 is defined. The adjusted value in % refers to the configured complete
tilting time of the appropriate venetian blind of the parameter cards Motor 1…4/Motor 1-4.
100 %
100 %
0 %
0 %