animeo KNX/EIB 4 AC MoCo • REF. 5050779 -
13/31
No.
Object name
Type
Description
77
Input 2: UP / DOWN
1 Bit (EIS 7)
see description of object 69, C/D instead of A/B
78
Input 2: Step/Stop
1 Bit (EIS 7)
see description of object 70, C/D instead of A/B
79
Input 2: C, Switch
1 Bit (EIS 1)
see description of object 71, C instead of A
80
Input 2: D, Switch
1 Bit (EIS 1)
see description of object 72, D instead of B
81
Input 2: C, 8-Bit-value
1 Byte (EIS 6)
see description of object 73, C instead of A
82
Input 2: D, 8-Bit-value
1 Byte (EIS 6)
see description of object 74, D instead of B
83
Input 2: C/D, Dimming
1 Bit (EIS 2)
see description of object 75, C/D instead of A/B
84
Input 2: C/D, Dimming value
4 Bit (EIS 2)
see description of object 76, C/D instead of A/B
85
Input 3: UP / DOWN
1 Bit (EIS 7)
see description of object 69, E/F instead of A/B
86
Input 3: Step/Stop
1 Bit (EIS 7)
see description of object 70, E/F instead of A/B
87
Input 3: E, Switch
1 Bit (EIS 1)
see description of object 71, E instead of A
88
Input 3: F, Switch
1 Bit (EIS 1)
see description of object 72, F instead of B
89
Input 3: E, 8-Bit value
1 Byte (EIS 6)
see description of object 73, E instead of A
90
Input 3: F, 8-Bit value
1 Byte (EIS 6)
see description of object 74, F instead of B
91
Input 3: E/F, Dimming
1 Bit (EIS 2)
see description of object 75, E/F instead of A/B
92
Input 3: E/F, Dimming value
4 Bit (EIS 2)
see description of object 76, E/F instead of A/B
93
Input 4: UP / DOWN
1 Bit (EIS 7)
see description of object 69, G/H instead of A/B
94
Input 4: Step/Stop
1 Bit (EIS 7)
see description of object 70, G/H instead of A/B
95
Input 4: G, Switch
1 Bit (EIS 1)
see description of object 71, G instead of A
96
Input 4: H, Switch
1 Bit (EIS 1)
see description of object 72, H instead of B
97
Input 4: G, 8-Bit-value
1 Byte (EIS 6)
see description of object 73, G instead of A
98
Input 4: H, 8-Bit-value
1 Byte (EIS 6)
see description of object 74, H instead of B
99
Input 4: G/H, Dimming
1 Bit (EIS 2)
see description of object 75, G/H instead of A/B
100
Input 4: G/H, Dimming value
4 Bit (EIS 2)
see description of object 76, G/H instead of A/B
5.
Motor output configuration
Options:
Combined
Individual
With these parameters it can be specified whether the
configurations of the motor outputs are to be done
“Combined“ or “Individual”. If the parameter
“Combined” is selected for the basic settings of all four
motor outputs, only one parameter card will be visible
(Motor 1-4).
m
This setting (“Combined”) is recommendable for
projects where the configurations of the motor
outputs are equal.
If the parameter “Individual” is selected for the basic
settings of the motor outputs four individual cards will
be visible (Motor 1, Motor 2,…).
Parameter card „General“
The options of the individual parameters are described in each case. The default values are shown in italic. In the following illustrations of the
different parameter cards a maximum of parameters is always presented.
Parameters
