SOMFY animeo DRM Скачать руководство пользователя страница 10

Страница: 10 / 47

animeo KNX 4 AC MoCo · REF. 5071074 -

10/47

Communication objects

At the most, 150 communication objects are available for use, but not all at once. A maximum of 250 group addresses can be connected.

No. Object name

Model

DPT_ID

Description

Motor 1 UP / DOWN, CLOSED / OPEN

1 Bit

1.001

If a telegram with the value "0" is received by this communication

object, the corresponding blind is moved upwards or a window

is closed. If a telegram with the value "1" is received, the corre-

sponding blind is moved down or a window is opened. At the end

of the set move time for UP or DOWN direction or the move time for

opening or closing of the window, the relays of the outputs are

freed.

Motor 2 UP / DOWN, CLOSED / OPEN

1 Bit

1.001

Motor 3 UP / DOWN, CLOSED / OPEN

1 Bit

1.001

Motor 4 UP / DOWN, CLOSED / OPEN

1 Bit

1.001

Motor 1 STEP / STOP

1 Bit

1.001

With Venetian blinds:

If the Venetian blind is moving, the move is

stopped with the receiving of a telegram on one of these commu-

nication objects, no matter whether "0" or "1" is received. If the

Venetian blind is stationary, a turn is carried out. In addition, the

slats turn CLOSED with the receiving of a telegram with the value

"1" and UP with the receiving of a telegram with the value "0". The

duration of the turning step is defined in the parameter settings.

With vertical awnings, roller shutters, awnings and windows:

When one of the end products is moving, the move is stopped with

the receiving of a telegram on one of these communication objects,

no matter whether "0" or "1" is received. If one of these end

products is not moving and a telegram is received on one of these

communication objects, then no operation is carried out.

Motor 2 STEP / STOP

1 Bit

1.001

Motor 3 STEP / STOP

1 Bit

1.001

Motor 4 STEP / STOP

1 Bit

1.001

Motor 1 Position UP / DOWN

1 Byte

5.004

If a telegram is received on one of these communication objects, the

corresponding blind will move to the position which is defined by

the received value "0" = upper / "255" = lower.

With Venetian blinds:

When the position is reached, the same

slats angle is moved to at which the Venetian blind was before.

Between the receiving of a telegram on the objects 9-12 and the receiving of a telegram on
the objects 13-16, a temporary time lapse of 2 seconds must be taken into consideration.

Motor 2 Position UP / DOWN

1 Byte

5.004

Motor 3 Position UP / DOWN

1 Byte

5.004

Motor 4 Position UP / DOWN

1 Byte

5.004

Motor 1 Slat position

1 Byte

5.004

With Venetian blinds:

If a telegram is received on one of these

communication objects, the corresponding slats will move to the

position which is defined by the received value. If a Venetian blind

is moving and receives a value on the corresponding object, the

position of the slats is moved to only when the move has been

completed. Depending on the parameter settings on the card index

"General" the position is defined as follows:

"255" = slats max. closed /

value (0/255)

value (255/0)

"0" = slats max. turned

"0" = slats max. closed /
"255" = slats max. turned

Motor 2 Slat position

1 Byte

5.004

Motor 3 Slat position

1 Byte

5.004

Motor 4 Slat position

1 Byte

5.004

Motor 1 Move to IP 1

1 Bit

1.001

If a telegram with the value "1" is received on one of these com-

munication objects, the corresponding blind moves to the ETS

parametered per local switch, or to the radio hand-transmitted,

learned-in intermediate position 1. In addition, the learned-in

position is valid. With the receiving of a telegram with the value "0"

on one of these communication objects, the blinds 1-4 move to the

upper end position.

Motor 2 Move to IP 1

1 Bit

1.001

Motor 3 Move to IP 1

1 Bit

1.001

Motor 4 Move to IP 1

1 Bit

1.001

Motor 1-4 Move to IP 1

1 Bit

1.001

If a telegram with the value "1" is received on this communication

object, the blinds 1-4 move to the ETS parametered per local switch,

or to the radio hand-transmitted, learned-in intermediate position

1. In addition, the learned-in position is valid. With the receiving

of a telegram with the value "0" on this communication object, the

blinds 1-4 move to the upper end position.

Motor 1 Move to IP 2

1 Bit

1.001

If a telegram with the value "1" is received on one of these commu-

nication objects, the corresponding blind moves to the intermediate

position 2 parametered in the ETS parameters. With the receiving

of a telegram with the value "0" on one of these communication

objects, the corresponding blind moves to the upper end position.

Motor 3 Move to IP 2

1 Bit

1.001

Motor 3 Move to IP 2

1 Bit

1.001

Motor 4 Move to IP 2

1 Bit

1.001

Содержание animeo DRM
















































Результаты поиска

Содержание animeo DRM

Отзывы:

Похожие инструкции для animeo DRM

Бренды по названию

Популярные бренды

SOMFY animeo DRM, Инструкция по эксплуатации

Результаты поиска

Содержание animeo DRM

Отзывы:

Похожие инструкции для animeo DRM

Бренды по названию

Популярные бренды