SOMFY animeo DRM Скачать руководство пользователя страница 24

Страница: 24 / 47

animeo KNX 4 AC MoCo · REF. 5071074 -

24/47

Slats position (0 - 100 %)

Selection options:



0 - 100 seconds

With this parameter the intermediate position 2 "Slats" is defined. The set value in % refers to the parametered complete slats turn of the

corresponding Venetian blind of the menu index card Motor 1…4 / Motor 1-4.

Block position orders (byte) and intermediate position 1

Selection options:



Yes

Position orders (byte) can be blocked per object (57-60) using this parameter. If a telegram with the value "1" is received on the corre-

sponding object during a blinds move, this move is carried out up to the end. Only then are further move commands (byte) blocked. If a

telegram with the value "0" is received on the corresponding object, the move commands (byte) are released again.

Block slat orders (byte)

Selection options:



Yes

Slat orders (byte) can be blocked per object (57-60) using this parameter. If a telegram with the value "1" is received on the correspond-

ing object when the Venetian blind is turning, this move is carried out up to the end. Only then are further slat orders (byte) blocked. If a

telegram with the value "0" is received on the corresponding object, the slat orders (byte) are released again.

Block UP/DOWN orders (bit)

Selection options:



Yes

UP/DOWN orders (bit) can be blocked per object (57-60) using this parameter. If a telegram with the value "1" is received on the cor-

responding object during a blinds move, this move is carried out up to the end. Only then are further UP/DOWN orders (bit) blocked. If a

telegram with the value "0" is received on the corresponding object, the UP/DOWN orders (bit) are released again

Block Step/Stop (bit)

Selection options:



Yes

Step/stop and turn commands (bit) can be blocked per object (57-60) using this parameter. If a telegram with the value "1" is received on

the corresponding object during a blinds turn, this turn is carried out up to the end. Only then are further turn commands (bit) blocked. If a

telegram with the value "0" is received on the corresponding object, the step/stop or turn commands (bit) are released again.

Block local push buttons and Somfy RTS radio orders

Selection options:



Yes

Local push buttons inputs and the Somfy RTS radio signal can be blocked per object (57-60) using this parameter. If a telegram with the

value "1" is received on the corresponding object during a motor movement, this turn is carried out up to the end. Only after completion are

any further commands blocked which are generated via local push button inputs or Somfy RTS radio signals. If a telegram with the value "0"

is received on the corresponding object, the local push button inputs and Somfy RTS radio signals are freed again.

Repeat last telegram after security

Selection options:



Yes

If this parameter is set to "Yes", the last move command is repeated after security. This means that it will move to the position which was

active before a telegram with the value "1" was input to one of the corresponding security objects, low or high.

100 %

0 %

Содержание animeo DRM
















































Результаты поиска

Содержание animeo DRM

Отзывы:

Бренды по названию

Популярные бренды

SOMFY animeo DRM, Инструкция по эксплуатации

Результаты поиска

Содержание animeo DRM

Отзывы:

Бренды по названию

Популярные бренды