CSW-H85K User Manual Ver. 2.4
- 21 -
2.2
Installation
Before testing CSW-H85K, make sure that a connection between your PC and CSW-H85K
is established via Serial and wireless LAN. This section is an example which is based on
Infrastructure mode.
Figure 2-7 WLAN and RS232 connection with a laptop
2.2.1
Making Wireless LAN link
When you connect an AP or wireless LAN adapter to your PC, Wireless LAN link is not
automatically established. Therefore, its parameters should be set on CSW-H85K
beforehand.
Setting by Serial
①
Supplying Power
Supply power of CSW-H85K.
②
Changing to Serial Configuration mode
Press the function button or place the function switch to SET.
③
Reading environmental parameters
Open a COM port of [Serial] tab on ezManager and press [Read] button.
Figure 2-8 reading environmental parameters