CSW-H85K User Manual Ver. 2.4
- 43 -
5.2.2
Examples
A situation that [Event Byte] is set to 0
Figure 5-4 time chart
Time
States
~
Power is not supplied yet.
①
CSW-H85K sends a connection request segment right after it
boots up.
~
processes of TCP connection
②
The connection is established.
~
data communication on both sides
Table 5-7 states of each point
Look at the blue arrow. The data
“
123
”
from the serial port was sent before establishing a
connection. In this case, the data would not be sent because of the [Event Byte] is set to 0.