Sollae Systems CSW-H85N, Руководство пользователя

Страница: 51 / 83

CSW-H85K User Manual Ver. 2.4
- 50 - http://www.ezTCP.com
5.4 UDP
UDP has no connection processes. In this mode, data is sent in block units. Therefore,
data that comes through CSW-H85K ’s serial port is collected in block units to send it
elsewhere.
5.4.1 Key parameters

Block Size
[Block Size] is to set the time to gather data in one block. Its unit is byte. If the data
in configured size of the [Block Size] comes into the serial port, CSW-H85K will send
them as one block to the network. The maximum value could be 1460 bytes.

Data Frame
[Data Frame] means the time for gathering data to make one block. Its unit is 10ms.
If there is no data from the serial devices during the [Data Frame] time, CSW-H85K
sends and receives data in the buffer as one block to the network.

Once one of the two parameters, [Block Size] and [Data Frame], is sufficient, UDP
packet block will be transmitted.

Dynamic update of Peer host
If you set the value of [Peer Address] and [Peer Port] to 0, [dynamic update of peer
host] function is activated. By using this function, CSW-H85K can communicate to
multiple hosts without additional setting.