CSW-H85K User Manual Ver. 2.4
- 55 -
6.2
Status Monitoring
6.2.1
TELNET
When the [TELNET] option is activated, you can remotely log in to CSW-H85K. If a
password is set, you should input the password.
Starting with firmware version 2.4A, you can login by entering "sollae" without
setting a password.
After then, messages from CSW-H85K will appear like the following figure.
Figure 6-3 log in to CSW-H85K via TELNET
The following commands help you check states of CSW-H85K
Command
Option
Description
Usage
st
net
IPv4 Network Status
lsh>st net
net6
IPv6 Network Status
lsh>st net6
sio
Serial Port Status
lsh>st sio
uptime
System Uptime
lsh>st uptime
sd
[OP1][OP2]
Serial data Dumping
lsh>sd 1 100
Stop Serial data dumping
lsh>sd 1 0
sc
[OP1][OP2] Session Close
lsh>sc com1 close
exit
-
TELNET Session Close
lsh>exit
Table 6-1 commands for checking states
st net
This command is displays current IPv4 network states of all sessions.
Figure 6-4
“
st net
”
command