CSW-H85K User Manual Ver. 2.4
- 37 -
4.5
Serial Configuration mode
4.5.1
Configuring Parameters
This is a mode for setting environmental parameters through the serial port. If you
cannot use the WLAN, this mode is only way to configure the parameters. Click the [Read]
button on the [Serial] tab on ezManager after entering this mode.
Refer to the [Serial Management Protocol] document on our website for details.
4.5.2
Revoking Serurity Options
CSW-H85K offers strong for security like filtering with password or MAC and IP addresses.
In the Serial Configuration mode, you can revoke all of these options. When you forget the
password, enter this mode to change or delete it.
4.5.3
Background Soft AP
CSW-H85K activates Soft AP function in background while operating under Serial
Configuration mode.
4.6
ISP mode
4.6.1
Upgrading Firmware
ISP mode is for upgrading firmware. Upgrading Firmware is implemented by ezManager.
For more details about this, please refer to the chapter 6.1.