CSW-H85K User Manual Ver. 2.4
- 47 -
5.3.2
Examples
TCP Server
–
setting parameters and passive connection
Figure 5-7 time chart
Time
States
~
configuring parameters with AT commands
①
ATA command has arrived.
~
CSW-H85K listens to TCP connection requests.
②
A remote host sends SYN segment to CSW-H85K.
~
processes of TCP connection
③
TCP connection is established.
~
CSW-H85K sends
“
CONNECT
”
message to the serial port.
Table 5-11 states of each point
Some of the response messages from the serial port of CSW-H85K are omitted on
above figure.