CIE-M10 User’s Manual Ver. 1.1
Sollae Systems Co., Ltd.
- 52 -
http://www. eztcp.com
10
Additional Functions
10.1
Security Function
10.1.1
Password
User can set a password to the CIE-M10 with the [Set Password] button in the ezManager.
Once a password is set to the CIE-M10 user should input it when he configures it with the
ezManager. And user needs the password when he logs in with telnet and accesses it with web
browser.
10.1.2
Access Control with MAC Address
User can restrict hosts with MAC address. If [Allowed MAC Address] in the Option tab, the only
host which has the MAC address can access to the CIE-M10.
10.1.3
Access Control with IP Address
If [Allowed IP Range] is set in the Option tab, the hosts whose IP address is in the range can
access the CIE-M10. The [Allowed IP Range] is defined by doing bitwise AND between IP address
and the [Network Mask]. The followings are examples.
IP Address
Net Mask
Hosts can access to the CIE-M10
10.1.0.1
255.0.0.0
10.1.0.1 ~ 10.255.255.254
10.1.0.1
255.255.255.0
10.1.0.1 ~ 10.1.0.254
192.168.1.4
255.255.255.255
192.168.1.4
Table 10-1 Example of IP address range
10.1.4
Access Control from ezManager
If this option isn‟t set, ezManager in any host can read the parameters even though the
[Allowed MAC Address] or the [Allowed IP Range] is set. If the [Apply To ezManager] is set, the
above two options ([Allowed MAC Address and Allowed IP Range]) are adapted to the ezManager.
10.1.5
Disabling Security Functions
When user can‟t access to the CIE-M10 because of the security functions, user can solve the
problem if user run it as ISP mode or Serial Configuration Mode. All security functions are
disabled in those modes.
