Solidyne 2600 serie, Руководство пользователя

Страница: 44 / 45

5.3 Technical specs
Audio Inputs
A & B – 2 inputs per channel. 2601 balanced stereo line and un-
balanced AUX. 2610/2612 balanced MIC
2620 Digital USB and balanced AUX.
In option USB 2602 , 2 inputs and 2 outputs
Outputs
3 bus outputs; PGM & AUD ba 4 dBm;
AUX Unba 4 dBm
Balanced Outs; Max Level +26dBu (10K), +20dBm (600ohms)
Unbalanced Outs; Max Level = +20dBm/600 ohms
Optional Digital AES/EBU output for PGM & AUD.
Inputs Level/Impedance
Balanced MIC= -25 dBu/-80 dBu; 150/250 Ohms
Balanced LINE = -20 dBu/+22 dBu; 600~ 10Kohms
Unbalanced AUX = -20 dBu/+15dBu; 600~ 10Kohms
Digital Levels
AES-3/SPDIF outputs TCP/IP & USB inputs & outputs; 0VU RMS
is set at -15dB Ref Full Scale level. 0dB Peak is set to 100% Full
Digtal Scale
Phantom 48V
Standar phantom 48V power supply for up to 10 microphones.
Monitor & Hybrid Outputs
4 stereo monitor outputs for active speakers and headphones,
including internal hedphones distribution Amp (up to 8 headph-
pnes) in announcer studio.
1 External Hybrid input + 4 dBu/10K
1 External Hybrid send output (MIX-Minus) +4 dBu / 10K
Each 2602 channel has one Mix-Minus out at 0 dBu output
CUE Monitor
3W CUE monitor with internal speaker.
Phone Hybrid
3 Hybrid inputs, 2 for phone lines and one for cellular phone at
4 wires. It includes a mini-PBX with Ringer, Line attention with
free hands operation, and Line Transfer.
Frequency Response: 250 - 4.000 Hz
Noise: > 60 dBA S/N
Rejection: > 30 dB rejection
Rejection adjust:: Quick Test Mode to adjust the hybrid
balance without disturbing On-air oper-
ation.
Preference attenuation: 10 dB local speaker interrupt priority.
Automatic On-Air logic: Audio & Logic are managed from a sin-
gle 100mm slide fader that performs all
the operations in error-free mode.
Lighting discharge safety: Telephone Hybrid inputs are
transformer floating to meet the Public Telephone service iso-
lation standards. They are protected with SIOV Varistors
against lightning discharges. And are factory tested to 2.000
volts capacitor discharge according to Siemens/Ramatel
44.04 standard. Protector is mounted in plug-in board. We
recommend in some areas using external gas discharge pro-
tection
Voice Quality Restoration
The optional 2630 module allows using VQR technology for all
the telephone hybrid signals, included external hybrids. It means
to restore the cuasi-original voice quality that is impaired during
a telephone or cellular communication.
ON-AIR LIGHT
ON-AIR signal output (turns on when MIC is open) 12 VDC @ 0,3
amp
Microphone Processor
Optional MIC module model 2612, 160mm wide, with 3 MIC
with processing facilities. 4 band EQ, 80 Hz and 10 kHz shelv-
ing, 160 Hz & 5 kHz bell shaped; +/- 14 dB action. Expander
Gate to eliminate backgound noise. Audio Compressor, 20 dB
action. Iluminated switchs for EQ and Compressor-Expander
Monitor & Hybrid Outputs
1 Separate Hybrid CUE, +4dBu / 10K
1 Hybrid On-Air R 4 dBu/10K
1 Hybrid send (MIX-Minus) +4 dBu / 10K
Headroom
22 dB @ LIN to PGM Ref + 4dBu/10 k
Digital Control Bus
One Start Devices output for each input module, to start exter-
nal devices when open each channel fader. Out at minijack 1/8"
// Ring = A channel (left side) Tip= B channel (Rigth side) Open
collector OFF = Open Manages 0-24 V DC @ 100 mA
This allows to control audio processors and start audio devices.
Frequency response
20-20.000 Hz +/- 0.25 dB (LIN or MIC to PGM)
Noise
MIC input, EIN=-132 dBu/150 ohms
LINE input, S/N > 95 dBA at PGM output
Dynamic Range
From Line to PGM > 110dBA (Better than CD quality)
Crosstalk
PGM-AUD-SEND > 90 dBA @30-10.000 Hz
L-R & R-L > 80 dBA @ 1khz
Start external devices
One Start Devices output for each input module, to start ex-
ternal devices when open each channel fader. Out at minijack
1/8" // Ring = A channel (left side) Tip= B channel (Rigth side)
Open collector OFF= Open. Manages 0-24 VDC @ 100 mA. This
allows to control Virtual Rack processors and start audio de-
vices.
Headroom
22 dB @ LIN a PGM Ref + 4dBu/10 k
Frequencies response
20-20.000 Hz +/- 0.25 dB (LIN or MIC to PGM)
Noise
MIC, EIN=-132 dBu/200 ohms
LINE, S/N > 95 dBA
Dynamic range
From LINE to PGM > 110dBA (better than “CD quality”)
Crosstalk
PGM-AUD-SEND > 90 dBA @30-10.000 Hz
L-R & R-L > 80 dBA @ 1khz
Distortion
From LINE to PGM out < 0.01 % THD @30-15.000 Hz.
From MIC to PGM out < 0.01 % THD @30-15.000 Hz
Phase
From Line to PGM, < 2º L&R @50-10.000 Hz
Page 44 Broadcast mixing consoles - 2600 series solidynepro.com