Solidyne 2600 serie, Руководство пользователя

Страница: 18 / 45

automated stations which are reactivated
automatically after a power outage.
2.4.2.6 Remote dimming (PAD)
If PGM button is lighted, that channel is enabled to
respond to global dimming 'PAD', available on 'Vir-
tual2600' software. Enabling 'PAD' in the soft, all
line channels that have this feature enabled will at-
tenuate by 10 dB.
2.4.3 Jumpers on Master Module
2.4.3.1 Hybrid’s priority circuit
The circuit “priority” of the hybrid attenuates the au-
dio coming from the telephone line when the
speaker talks. This way the Studio have priority
over the caller improve the audio quality of the local
voice.
In some uses, like sport transmissions, this effect is
undesired (it is not desired to attenuate the atmos-
phere of the stage when the speaker from studies
reads an announcement). The priority can be dis-
abled quitting the jumper
JPRIORITY located in
Master circuit board.
2.4.3.2 External control of Master MIC button
Connector EXT MIC CONTROL allows remotely to
turn on/off the “Masters MIC” button. Same con-
nector sends a positive voltage when Master button
is ON. “Master MIC” can be remotely switched on
by joining pins 3 and 4 (for example using a relay).
When the Masters MIC button is on, there are 15
VCC in pin 1 of the connector.
Fig. 15 - Master 2608 – circuit board view
MasterMIC external control
1 OUT 15 V (Master Mic pressed)
2 GND
3
MASTER MIC ON (joint to turn-on)
4
2.4.4.1 Jumper’s table for 2610, 2612 y 2601
MOD. JUMPER DESCRIPTION STATE CHANNEL
2610
JE’a
JE’b
Bypass EQ
Jumper 1-2 = EQ disable (by-pass).
Jumper 2-3 = EQ enable
See last letter of jumper name
Fig.12 – Mic module 2610 (circuit board side)
Page 18 Broadcast mixing consoles - 2600 series solidynepro.com
VQR