Solidyne 2600 serie, Руководство пользователя

Страница: 8 / 45

This page is intentionally left blank
Setup and connections
Chapter 2
2.1 About the wiring
The consoles come with their inputs and outputs
with RJ45 connectors and are wired using multipair
cable shielded CAT-5. With the advent of audio
over IP (AoIP) various manufacturers started using
RJ45 connectors and shielded multipair cable to re-
place the various audio connectors, to standardize
the entire installation with a single type of connec-
tor and a unique type of cable.
Additionally, the use of structured cable for connec-
tion between remote devices facilitates the installa-
tion anywhere in the world, due to availability of
components and assembly tools used in data net-
works. The multipair cable end that connects to the
audio device (microphones, speakers, playback de-
vices) still require standard audio connectors. For
this, the RJ45 cable provides termination sections
with RJ-45 female at one end and connector audio
as needed at the other.
2.1.1 Solidyne SOL45 wiring kit
Solidyne provides (as option) different kits of cables
“
SOL45”, designed to make the installation of a
Solidyne 2600 console in a few minutes. This wiring
kits are made using shielded multipair CAT-5.
2.1.1.1 Standard kit
The basic option is "SOL45 / 10" that connects
consoles up to 10 audio channels. Consolas with
more than 10 channels will use the "SOL45/NN" kit
being "NN" the number of audio channels.
Consoles wired with these kits will have the con-
nections detailed below. But if you need to add
more cables, you can do so freely as explained be-
low.
NOTE: in all cables the channel marked with a red la-
bel is the right channel .
1 MIC & LIN analog inputs. By each MIC or LINE
channel there are:
•
One RJ45-Male to RJ45-Male; length 2,5 m + one
Adapter RJ45-Female to 2 x XLR-Female (Left &
Right) In MIC cables ONLY the Left is used.
•
In line modules (2601) will be provided a half of ca-
bles with XLR-F and the other half with RCA connec-
tor.
2 USB inputs: For each module 2602 are included:
•
2 USB cables; length 1,80 meters
NOTE: If using Solidyne's DH400 Telephonic Hy-
brids, or another hybrid with independent mix-mi-
nus, ask cables SOL45.
3 Outputs of Master 2608
2 cables RJ45-M to RJ45-M, length 2,5
Adapter RJ45-F to 2 x XLR-M (channels Left and
Right) (One cable to balanced PGM output and an-
other cable for balanced AUD).
1 cable RJ45-M to RJ45-M length 2,5
Adapter RJ45-F to miniplug stereo (SND unbal out-
put).
1 cable RJ45-M to RJ45-M, length 2,5
Adapter RJ45-F to 2 RCA (input for external tuner).
Note 1: if the console have the optionals /VI, /AoIP
each optional includes its cable (2,5m.
Note 2: if the console have the optional /AES comes
with a cable of 2,5 adapter to 2xXLR (one for
AES- PGM and another for AES-AUD).
2.1.1.2 Additional cables
If additional cables are needed, the options are:
1. SOL-25 /SOL-50 Cable RJ45-M to RJ45-M, flexible
shielded, length 2,5/5 meters.
Note: Longer cables can be used using CAT-5 shielded
multipair and shielded RJ45 connectors.
2. SOL-XLRM Adapter RJ45-Female to 2 XLR-Male con-
nectors (balanced)
1. SOL-XLRF Adapter RJ45-Female to 2 XLR-Female con-
nectors (balanced)
2. SOL-MINIM Adapter RJ45-Female to 1 Miniplug 1/8”
stereo (unbalanced)
3. SOL-TRSM Adapter RJ45-Female to 2Plug ¼” TRS bal-
anced (separated Left and Right).
4. SOL-RCAM Adapter RJ45-F to 2 RCA connectors (un-
balanced)
Page 8 Broadcast mixing consoles - 2600 series solidynepro.com