Sole Diesel 100 GTA, Руководство оператора

Страница: 8 / 76

SAFETY PRECAUTIONS AND INSTRUCTIONS
8
Operator’s Manual Marine Diesel Gensets
Revision 2. 10/2017
Never remove the cooler cap if the genset is hot. Steam and hot genset coolant
will spurt out and seriously burn you. Allow the genset to cool down before you
attempt to remove the cooler cap.
Read the genset operator's manual and understand it before operation and maintenance
of the genset, to ensure that it continues operating practices and maintenance procedures.
Hearing protection. Use to avoid hearing loss when handling the motor.
1. The installer / operator of the genset has to wear suitable CLOTHING for the workplace and
the situation; in particular, avoid loose clothes, chains, bracelets, rings and all accessories
that could become entangled with moving parts.
2. The installer / operator of the genset has to wear personal protective equipment such as
gloves, work shoes, eye and hearing protection as required by the task.
3. The area in which the operator is working has to be kept tidy and free of oil and other liquid
spillages and solid waste (metal chips, etc.).
Genset labels
If the genset does not turn after several attempts to crank
may cause water entering the genset. In this situation it is
recommended:
1)
Close the seacock.
2) Drain the water from the exhaust system in the
water trap.
3)
Do not try to restart the genset until the cause of
the start fail is identified.
The genset and the gearbox are supplied without any fluid
inside. Consult the manual to follow the installation procedure
and commissioning as well as the fluid capacity - coolant, oil
and oil of gearbox.
Read the genset operator's manual and understand it before operation and maintenance of the
genset, to ensure that it continues operating practices and maintenance procedures insurance.