Sole Diesel 100 GTA, Руководство оператора

Страница: 25 / 76

SYSTEMS AND SCHEDULED MAINTENANCE
25
Operator’s Manual Marine Diesel Gensets
Revision 2. 10/2017
5.3. General
Solé Diesel offers, for these genset models, a maintenance kit:
MAINTENANCE TASK. SCREW TIGHTENING, FASTENINGT
For details of tightening torques see Section 9 Torques.
MAINTENANCE TASK. VALVE CLEARANCE INSPECTION
The rocker cover must be dismounted to check the valve clearance. This operation must
be carried out when the genset is cold.
INSPECTION
1. Insert the appropriate thickness gauge between
the rocker arm and valve cap to check the
clearance.
2. Loosen the rocker nut (1).
3. Tighten or loosen adjusting screw (2) to adjust
valve clearance by checking thickness with
thickness gauge (3).
4. When you have adjusted the thickness, tighten
the rocker nut and recheck the thickness.
With piston nº 1 in the top dead centre of the
compression cycle, adjust the play of the intake and exhaust valves of cylinder nº 1. Proceed
similarly as with the other cylinders. The position of the BTDC can be confirmed with thea lining signs
of the ditribution or timming cover and the crakshaft pulley.
The adjustment of the valve play must be made after the cylinder head screws are again
tightened.(Strictly comply with the operation sequence indicated in the heading 4.1)
Ref. of kit 19440111
Item Assembly standard
Valve clearance (cold
setting)
Inlet 0,3 mm
Exhaust 0,3 mm