Sole Diesel 100 GTA Скачать руководство пользователя страница 29

Страница: 29 / 76

SYSTEMS AND SCHEDULED MAINTENANCE

Operator’s Manual Marine Diesel Gensets
Revision 2. 10/2017

5.5. Fuel System

CIRCUIT DESCRIPTION

The fuel system is based on a fuel feed pump and an in-line mechanical injection pump.

FUEL SPECIFICATIONS

Use ASTM diesel fuel No.2-D for the best genset performance, to prevent genset damage.

Never use kerosene, heavy diesel fuel or biodiesel. It is essential to use clean and filtered diesel oil.

The use of diesel oil that not complies with the technical specifications may affect warranty

coverage and cause serious damage in the injection system and internal genset components.

MAINTENANCE TASK. FUEL LEVEL INSPECTION

Periodically, it is necessary to check the fuel level to assure the operation of the genset.

On top of that, if fuel pump sucks air when the fuel level is lower than pump suction, it could break.

Whenever possible, keep the fuel tank full. The temperature changes may cause

condensation of the damp air present in the tank and this water accumulates at the bottom. It
can cause an increase of corrosion or an impossibility of starting the genset if this water is aspired
by the fuel pump.

MAINTENANCE TASK. FUEL TANK CLEAN

The fuel impurities could obstruct the suction pump. For this reason, drain out the content

of the fuel tank to remove condensate and any foreign material. Then, wash the tank with fuel and
refill it.

PIECE ELEMENT

Fuel tank (supplied as accessory)

Fuel intake line (supplied as
accessory)

Fuel feed pump

Fuel line to fuel filter

Fuel filter

Fuel line to injection pumps

Injection pumps

Fuel high-pressure pipes

Injectors

Fuel return line

Pressure holding valve

Fuel return to tank

Fuel decanting filter (supplied as
accessory)

Содержание 100 GTA













































































Результаты поиска

Содержание 100 GTA

Отзывы:

Бренды по названию

Популярные бренды

Sole Diesel 100 GTA, Руководство оператора

Результаты поиска

Содержание 100 GTA

Отзывы:

Бренды по названию

Популярные бренды