Sole Diesel 100 GTA, Руководство оператора

Страница: 11 / 76

SOLÉ DIESEL WARRANTY
11
Operator’s Manual Marine Diesel Gensets
Revision 2. 10/2017
Restrictions
Coverage:
a) The warranty covers any failure of the product under normal opera- ting conditions
caused by a defect in manufacturing.
b) The warranty covers the labour costs necessary to replace and/or repair the defective
original components, according to Solé Diesel standards of excellence. The time period
covered for these operatio- ns is limited to 4 hours.
c) The warranty covers reasonable costs of travel required to carry out the necessary
operations. The travel distance is limited to 300 kilome- tres in conjunction to a travel time
of 3 hours.
Excluded from coverage:
a) If Solé Diesel products are installed and used alongside other products not designed or
manufactured by Solé Diesel that affect their operation, the warranty shall apply
exclusively to the Solé Diesel products and shall not apply if the products from another
manufacturer are inappropriate for use alongside Solé Diesel products or are the cause
of the failure or poor operation of our products.
b) The warranty shall not apply if the revisions and maintenance services indicated in the
User and Maintenance Manuals have not been adhered to properly. In case of
implemented warranty, supporting document of the revisions and maintenance service
should be exhibited, proving the requirements outlined in the manuals have been
followed.
c) Deterioration resulting from time of storage exceeding 6 months and/or storage
conditions that do not comply with the procedures described in the User and
Maintenance Manuals.
d) Deterioration resulting from not complying with the procedure for winter storage while
the engine is not in service, as described in the User and Maintenance Manuals.
e) Faults due to negligence, lack of service, accidents, abnormal use and inadequate
service or installation.
f) Faults due to the use of components not manufactured or sold by Solé Diesel.
g) Faults due to electrical installations that do not comply with Solé Diesel design
specifications or are not expressly approved by Solé Diesel.
h) Faults due to the use of and operation with fuels, oils or lubricants that are not authorised
by Solé Diesel.
i) Faults due to water entering the cylinder(s) through the exhaust system.
j) Faults in propulsion engines due to the use of a propeller that is inadequate for the load
or application. We recommend contacting Solé Diesel to consult the choice of the
correct propeller(s).
k) Failure for general omission of the procedures described in the User and Maintenance
Manuals.
l) Components subjected to normal operating wear and tear.