Sole Diesel 100 GTA, Руководство оператора

Страница: 37 / 76

SCO 10 PANEL
37
Operator’s Manual Marine Diesel Gensets
Revision 2. 10/2017
If undue vibrations or noises appear after long-term usage, these could be due to a worn
bearing that, if damaged, has to be replaced. No maintenance is required for the total operating
time:
A bearing lifespan is closely linked to the working conditions and environment.
Long periods of sustained vibrations can damage the bearing balls and their seat. Too
high humidity can emulsify the grease and encourage corrosion.
Intense vibrations caused by the motor or bad alignment of the components in the
genset put the bearing under stresses that will reduce its lifespan.
MAINTENANCE TASK. CLEANING AND LUBRICATION
Any kind of cleaning work must be carried out with the genset shutdown and the mains
power shut off for the risk of severe hazard for persons and objects. Moreover, prior to approaching
or touching the alternator, ensure that it is at room temperature.
Make sure that the genset is shutdown and the mains power is shut off before cleaning the
outside of the genset with compressed air.
Never and for no reason whatsoever use fluids or water. Do not use compressed air to
clean internal electrical parts since this could cause short circuits or related problems.
Operating time
20.000 horas