en
41
5593 Pac inverter
Connection diagram for "Pac inverter" operating mode see Figure 30: the consumer loads
are controlled via the inverter's multi-function relay. For example, the control voltage for
a contactor or a relay can be switched on and off.
The "Pac inverter" operating mode can be configured on the inverter's graphics display
or using MaxTalk 2.
S0−
S0+
BS−
BS+
12
NC
14
11
R
K
N
Inv
PV
kWh
kWh
°C
0
20
40
60
80
100
120
Figure 30 Wiring in "Pac inverter" operating mode
Legend:
R: consumer / Inv: inverter / PV: PV generator / N: grid connection point / K:
contactor, relay
Procedure
■
■
Connect the multi-function relay as described in Section 5.5.6.
■
■
Configure the control of self-consumption as described in Section 6.3.6.2.
