manualshive.com logo in svg

SolarMax 330TS-SV Compact Station, Инструкция по эксплуатации

Поделиться
Скачать
SolarMax 330TS-SV Compact Station Скачать руководство пользователя страница 55

en

55

 

Note

The deletion process cannot be undone!

Cancel / 

 Confirm deletion

7.6 

Operating status

The status message displayed on the graphics display describes the current operating 
status of the Compact Station. Each status message is one of five possible messages. 
The status LED shows one of different indicator colors to indicate the relevant operating 
status.

In addition to the status messages, the graphics display also displays warnings. War-
nings result from device errors or external malfunctions. The Compact Station will not 
disconnect from the mains, but yield losses are possible. Warnings are independent of 
the operating status and are displayed on the graphics display alternately with the current 
status message.

Status LED

Operating status

Description

Off 

-

The Compact Station is switched off > disconnected 

from the grid

Flashes green 

Booting

Compact Station is starting > disconnected from 

the grid

Green 

Mains operation

Mains feed-in (normal operation)

Flashes orange

 

-

Warning > no grid disconnection

Orange 

Failure

External failure > grid disconnection

Red 

Error

Device error > grid disconnection

Flashes red  

Blocked

Compact Station is blocked > disconnected from 

the grid

The "Failure", "Error", and "Blocked" status messages, and the warnings, usually require 
certain measures to be taken by the qualified electrician in charge (see Section 8).

Содержание 330TS-SV Compact Station





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды